Identificador: 475
Abierta
ID de articulo : # 196 se ha agregado a su lista de deseos.
Descripción
PARTE: 1SL-DC-SP30 - PRENSA HIDRAULICA - 30 TONS
MEDIDAS TOTALES: 170 CMS ALTO X 32 CMS FONDO
PISTON SUBE Y BAJA DE 3 A 5 SEGUNDOS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-12493 - EXTRACTOR DE PARED - DAYTON
PARTE: AMX-12493 - EXTRACTOR DE PARED DAYTONUSADO - MUY BUENAS CONDICIONESMedidas totales: 24” ancho x 19”
fondo x 28” altoAspas Diámetro: 24”Motor: ½ HP, 115/230V, 1 fase, 60
Hz, Amp 7.6/3.8, marca Dayton
Video: https://vimeo.com/870512971
AMXmachinery
PARTE: 12534 - ESCOPLO OSCILANTE - 2 MESAS - BALESTRINI
PARTE: 12534 - ESCOPLO OSCILANTE -
2 MESAS - BALESTRINI
USADO - MUY BUENAS CONDICIONES440V, 3 FASES
AMXmachinery
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE
METALES FINOS - BLOAPCO - MODEL 5TOB
Para papel, cartón corrugado y fibras pesadasBEST USES Removal of continuous film, Edge Trim and MatrixINDUSTRIES Converting, Paper, Film, Plastic, Non-woven, FoilsIDEAL FORpaperlight fiber boardcorrugated boardsolid bleached sulfate paperboardplastic filmfoil laminatespressure-sensitive stocklight, non-ferrous foils CAPABILITIESMaterials:
Paper, corrugated and heavy fiber boardTrim
Width max: 8 1...
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...