PARTE: 12318 - CALDERA - CLEAVER BROOKS - 200 HP USADA - BUENAS CONDICIONES MFG: 2014 MODEL: FLX FUEL SERIES: 700 SIZE: 900 PRESSURE: 15 ST

PARTE: 12317 - CALDERA - HURST 400 HP USADA - BUENAS CONDICIONES HURST 400 HP MFG: 1997

PARTE: 2CK-P20HV - CEPILLO - 1 CARA - CAPACIDAD 20” ANCHO - 5 HP - CABEZAL ESPIRAL Nuevo con garantía230/1/60 electrics - 1 Fase 230/3/60 electrics) - 3 Fases DESCRIPTION SPECIFICATION Maximum planing width 20″ Maximum planing thickness 8-5/8″ Feed speeds (2) 20 & 30 FPM Main motor 5 HP Cutterhead diameter 3-1/...

PARTE: 2TA-SFJ-4-141-AUTO - SISTEMA FINGER JOINT - AUTOMATICO - CAP 4” X 141” Nueva con garantía Incluye: Mesa Entrada Motorizada, Trompo Derecho, Trompo Izquierdo y PrensaFeatures: The fully automatic production line complete with the right hand shaper, left hand shaper, and assembler to produce the mass finger joint stocks. The right hand shaper performs end trimming and shaping functions on right end of sticks. The left hand shaper performs end t...

PARTE: 2TA-SFJ-6-244-AUTO - SISTEMA FINGER JOINT - AUTOMATICONueva con garantíaIncluye: Mesa Entrada Motorizada, Trompo Derecho, Trompo Izquierdo, Transportador y PrensaFeatures:·       Produce the mass finger joint stocks. ·       The SFJ-620R performs end trimming and shaping functions on right end of sticks. ·       The SFJ-620L performs end trimming, shaping & gluing functions on left end of sticks. ·       The two trim saws are fitted with one saw blad...

PARTE: 2MA-800CE - SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 27.75” NUEVA CON GARANTIAHeavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last!4 HP, 2800 RPM motor400 mm (15.75") Blade diameter capacity (Not included)30 mm Arbor diameter73.23" x 45.08" Table size27.75" Max crosscut length on 3/4" thick material (90 deg)0 to 40.5" Rip capacity4.9" Max depth of cut19.68" Max cut length at 45 deg on right side12.20" Ma...

PARTE: 2MA-640CE - SIERRA RADIAL - DISCO 15.75” - 4 HP - LARGO 21.5” NUEVA CON GARANTIAHeavy castings and the eight bearing saw carriage makes this machine very accurate and rigid. European quality made to last!4 HP for 3-Phase Option, 3 HP for Single Phase Option, 2800 RPM motor400 mm (15.75") Blade diameter (not included)62.20" x 38.39" Table size21.5" Max crosscut length on 3/4" thick material0 to 33.8" Rip capacity4.9" Max depth of cut15" Max cut length at 45 deg. On right side...

PART: 11636-E - 

PART: 12308 - ALPINE AUGSBURG MILL - 100 HP USED - GOOD CONDITIONS NO MOTORS INCLUDED, ONLY THE MILLSVideo1: https://vimeo.com/774527761

PARTE: 12315 - EXTRACTOR DE ASERRIN - 75 HP - DONALDSON USADO - MUY BUENAS CONDICIONES 22,000 CFM @ 7:1 Air-To-Cloth Ratio 3,029 Sq. Ft. of Media from (189) Bag Pulse Jet Filter Cleaning from Shop Air (2) AMM Modules Clean Air Plenum with Top-Bag Removal Service Railing with Kickplate Trough Hopper, Screw Auger To Rotary Airlock Discharge 75 HP Blower Complete with Starter and Cleaning Controls

PARTE: 12315 - PRENSA DE TABLEROS - 20 SECCIONES TAYLORUSADA – MUY BUENAS CONDICIONES SEMIAUTOMATICA 20 section 8.5 ft wide Pneumatic 120 Clamps Swing-Style Semi-Automatic Front-End 32" Long Clamps 8.5` Wide Machine Pneumatic Rotation with Foot-Pedal Controls

PARTE: 12314 - EXTRACTOR DE ASERRIN - 30 HP USADO - MUY BUENAS CONDICIONES 440V MURPHY RODGERS COLECTOR DE ASERIN AIRLOCK EXTRACTOR DE TRANSFERENCIA

PARTE: 12313 - EXTRACTOR DE ASERRIN - 60 HP USADO - MUY BUENAS CONDICIONES EXTRACTOR DE TRANSFERENCIA ESTACION DE CARGA DE CAMION

PARTE:12312 - MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL USADA - BUENAS CONDICIONES Mfg. 1997 Eleltronic drive, Hydro jointers, 1 manual jointer. 1&13/16" spindles.

PARTE: 12311 - SIERRA ESCUADRADORA VERTICAL - HOLZHER 1265 USADA - MUY BUENAS CONDICIONESSupercut with scoring; 75" X 169" capacity; 4 HP main motor; 1-7/8" maximum depth of cut; 220 mm diameter saw blade; saw head rotates 90° for rip and crosscutting; manual moving back grid via hand lever; (2) length stops; optional lower stop rail; hinged mid support rail; bottom rollers for easy movement of large panels; self-contained dust collection

PARTE: 12310 - SIERRA ESCUADRADORA VERTICAL - ELCON USADA - MUY BUENAS CONDICIONES YMFG: 2005 Voltage: 230V 60Hz 3Ph 7-1/2 HP 4,200 RPM motor; 163" horizontal cutting capacity; 72" vertical cutting capacity; 12" blade capacity; SIKO digital readout with 2 meters (78.75") magnetic band installed for horizontal positioning of the saw head; rigid welded box steel frame with (4) vertical cutting positions; round upper guide rail with concave bearings for smooth operation; equipped...

PARTE: 12309 - TRITURADORA DE MINERAL - MOLINO ALPINE AUGSBURG USADA - BUENAS CONDICIONES MOTOR PRINCIPAL: 20 HP MOTOR SECUNDARIO: 20 HPVideo Maquina: https://vimeo.com/672495902 Video con Motores: https://vimeo.com/1103528276

PARTE: 12307 - MOLINO PULVERIZADOR - PULVEX 300 USADA - BUENAS CONDICIONES MOTOR ACTUAL 12.5 HP, 220V, 2 FASES SE PUEDE COTIZAR MOTOR 10 A 15 HP 220/440V, 3 FASES

PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia 13-gal. coolant tank w/ 1.2 HP pump

PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960USADA – MUY BUENAS CONDICIONES9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia 13-gal. coolant t...