PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS – 40-300 MM ANCHO Nuevo con garantía Specification: 1.Max. / Min. Width: 300mm / 40mm 2.Max. / Min. Thickness: 10mm / 35mm 3.Min. Board Length: 270mm 4.Max. Board Length: Unlimited 5.Max. Board Weight: 15kgs 6.Cutterhead Spindle Motors: 5-1/2HP x2 (Optional: 7-1/2HP x2 or 10HP x2) 7.Feeding Pressure Roller Motor: 1HP W/1HP Inverter 8.Infeed Conveyor Table Motor: 1/2HP (Optional: Variable Feed 1H...

PARTE: 3HP-HP-400-4 - REASERRADORA HORIZONTAL – 4 SIERRA BANDAS – CON REGRESADOR Nueva con garantíaPara mas informacion, solicite una cotizacion detallada,1.With Digital Readout2.Max. Workpiece Size: 400mm(W) x 250mm(H)3.Conveyor Belt Size: 385mm(W) x 14840mm(L)4.Saw Wheel Dimension: Φ28" x 2"(Thickness)5.Saw Blade Size: 208"(L) x 2"(W)6.Dust Hood Diameter: 4" x 87.In-feed Speed: 4-20M/min8.Cutting Size: 4-250mm(T)9.Saw Blade Tensioning by Hydraulic Compensation System10.Main ...

PARTE: SIL-DC-CM13-B - CEPILLO 13” DE BANCO – 2 HP, 110V, 1 FASE - 2 CUCHILLASNUEVO CON GARANTIAPotencia 2 HP, 2HP, 60HZ, 110V, 2 CUCHILLASAltura máxima 15.2 cm Incluye conexión para el colector de polvo

PARTE: 2FA-RE6X12 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 12” NUEVA CON GARANTIA The widest cutting resaw available in our line of products. If your looking for a low cost solution to cutting up to 12" wide material, look no further. These saws are equipped with 20HP motors and 10" wide conveyor belts.   Standard Features Air Tensioned Blade System Enclosed Hydraulic System Easy Height Adjustment   Machine Specs Dimensions Length: 84" ...

PARTE: 2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA NUEVA CON GARANTIA Very similar to our 6 x 8 This automatic machine is equipped with a powered hold-down and an innovative powered belt return, which is self adjusting and offers operators the ability to fine-tune the return belt height and angle to fit your specific mix of products. When setting the sawblade to the desired board thickness, the feed belt conveyor and the return belt are ...

PARTE: 2FA-RE6X8 - REASERRADORA HORIZONTAL – 1 SIERRA – ANCHO 8” NUEVA CON GARANTIA The compact design and variable speeds allow it to fit into any operation. The 6 x 8 Master is resaw is accurate and easy to adjust. Multiple head configurations are available up to 6 heads.   Standard Features Air Tensioned Blade System Enclosed Hydraulic System Easy Height Adjustment   Machine Specs Dimensions Length: 84" Width: 90" Height: 48" Feed Belt...

PARTE: 2MK-DE-1800-4 – CANTEADORA 8 PULGADAS – 1 HP, 1 FASEThe Wood Jointer DE.1800/4 has 4 knives coupled to the main axis operating simultaneously resulting in an excellent cut finish.An ideal size table for large pieces, reinforced structure, precise adjustment and modern design.Has 4 knives coupled to the main spindle operating simultaneously; resulting in an excellent fine finish! An ideal size table for large pieces with a reinforced cabinet. With the rack and pinion mechanism the tabl...

PARTE: 2MK-DE-1200-3 – CANTEADORA 6 PULGADAS – 1 HP, 1 o 3 FASESThe Wood Jointer DE.1200/3 has the thickness function adjustable, making cuts adjustment in small pieces of wood, plywood and MDF.Based on structural plate and table in die casting, its axis works with 3 knives, which ensures a quality finish to their final product.Has a depth of cut adjustment feature for precise cuts in small pieces of wood, plywood and MDF. Wood Jointer DE.1200/3 is easy to adjust and operate.2 Year Warranty....

PARTE # 2TA-RM70 - BASTONERA PARA FABRICAR PALO REDONDO ESCOBA Y PERNOS Capacidad:  Redondos de ½” a 2” de diámetro (10MM a 65 MM)Motor principal: 5 HP, 220V, 60 Hz, 3 fasesMotor alimentador: 1 HP, 220V, 60 Hz, 3 fasesVelocidad de corte: 2,900 RPMVelocidad de alimentación: de 6 a 21 metros por minuto (240” a 520” por minuto)Peso neto: 350 KGSPeso Bruto: 510 KGSTipo de empaque: 1 cajaMedidas de la Caja: 40” x 40” x 40”La maquina incluye cabezal para 7/8” con cuchillas de acer...

PARTE: 2AR-67090 - HACHA HIDRAULICA – CAPACIDAD MAXIMA 18” LARGO X 6-1/2” DIAMETRO – 10 TONNueva con garantíaManually operatedExtra long handles for plenty of leverageCompact size for convenient storageProduct Measures: Width: 8-1/4 in. x Length 42-1/8 in. x Height: 9-3/4 in.Product Weight: 80.50 lb.Shipping Weight: 95.20 lb.Splitting Force (tons): 10Travel length (in.): 8-1/16 in.

PARTE: 2AR-61594 - HACHA GASOLINA – CAPACIDAD MAXIMA 23-1/2 LARGO X 16” DIAMETRO – 20 TONNueva con garantía20 tons splitting forceMotor 6.5 HP Predator 212cc 87 octane unleaded gasolineFuel Capacity: 0.9 gallonCompact size for convenient storageProduct Length: 85 in. x Width 41 in.TowableTire size (in.): 16 in.Shipping Weight: 413 lb.

PARTE: 2AR-63366 - HACHA ELECTRICA – CAPACIDAD MAXIMA 17” LARGO X 10” DIAMETRO – 5 TON

PARTE # 2TA-BS-1212HR-5 - REASERRADORA HORIZONTAL - 5 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...

PARTE # 2TA-BS-1212HR-3 - REASERRADORA HORIZONTAL - 3 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...

PARTE # 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with ...

PARTE: 2TA-BS-1212HR-TN - REASERRADORA HORIZONTAL - 2 SIERRASPARTE: 2TA-BS-1616HR-TN - REASERRADORA HORIZONTAL - 2 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 H...

PARTE # 2TA-BS-1616HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIASpecificationsBS-1616HRMax. Cutting Capacity16½" x 16-1/8" (420 x 410 mm)Distance Between Blade to Conveyor¼" x 10-5/8" (5 ~ 270 mm)Minimum Cut Thickness¼" (5 mm)Saw Wheel Diameter32" (800 mm) x 2Saw Blade Length231" ~ 231.1" (5860 ~ 5870 mm)Saw Blade Width2" (50 mm)Saw Blade Speed6150 FPMConveyor Belt Sizes (W x L)16" x 165½" (400 x 4200 mm)Feed Speed (Variable)40" (1016 mm)Return Conveyor Size100-3/8" x 24¾" x 3...

PARTE # 2TA-BS-1212BEE - REASERRADORA HORIZONTAL - 1 SIERRANUEVA CON GARANTIASingle saw head configuration.Manual saw wheel elevation.Variable feed speed by electric motor drive.Manual blade tension adjustment by a handle.Rubber pressure roller.SPECIFICATIONSBS-1212BEEMax. Workpiece Sizes (W x H)300 x 300 mm Distance From Blade to Conveyor Table5 - 130 mmConveyor Belt Sizes285 x 5470 mmSaw Wheel Diameter28" x 1" (W)Feed Speed5 - 25 m/minSaw Blade Size168" x 1"Saw Wheel Motor20 HPConveyor Motor2...

PARTE # 2TA-BS-1212HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIAMachine was built with ruggedly constructed throughout for maximum stability, high precision cutting and minimum trouble.It is equipped with a digital controller for convenient and accurate thickness setting.The feed conveyor has a tilting design allowing for maximum 30 degree bevel cuts.When the feed conveyor is tilted for bevel cutting a side support is applied for safe and stable cutting operations.Variable feed spe...

PART # 2NI-DE-R2 – DESCORTEZADOR – CAPACIDAD 40”- Slow speed, sliding ring design- Innovative 3 arm air cell type ring is simple in design and highly responsive in operation- Unique actuator/reservoir system allows setting of different tool pressure gradients when stopped- Excellent all round maintenance access- Chain bed style infeed and out feed- Hydraulic actuation for ring/infeed centering and out feed hold down rolls- Manual operator control standard, automation package is optional- H...