PARTE: 12137 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - COSTA USADA – BUENAS CONDICIONES First Machine 4 Heads Bottom 1.Steel Contact Roller 42 KW 2.Rubber Contact Roller 37 KW 3.Rubber Contact Roller 27 KW 4.Rubber Contact Roller 18 KW Panel Brush Cleaner Second Machine 4 Heads Top 1.Steel Contact Roller 42 KW 2.Rubber Contact Roller 37 KW 3.Rubber Contact Roller 27 KW 4.Rubber Contact Roller 18 KW 5. Panel Brush C...

PARTE: 12136 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR USADA – MUY BUENAS CONDICIONES Desmantelada y lista para envío (1) 8.5' Clamp frame (6) Section (20) clamps per section 3-1/2" jaws with 36" clamping length Pneumatic rotation by air control power feed Model:    8.5-6 Year of Manufacture:          2005 230V, 60 cycle, 3 phase Shipping Footprint: 10 (length) x 8 (width) x 8 (height)

PARTE: 12135 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - CEMCO USADA – EN BUENAS CONDICIONES 3 head Top & 3 head bottom Combination Planer Sander Newman/Whitney helical cutter heads on station #1, followed by 2 sanding heads on stations #2 and #3, with a live conveyor in between.  Machines were running when they came out of service and are in dry storage.  They were new in 1998 and each machine can operate independently. 

PARTE: 12134 – PRENSA CALIENTE – 5 PLATOS USADA – EN BUENAS CONDICIONES 4' x 8' 52" x 100" x 1.750" platens 3" of daylight 500 ton capacity 120 gallon hydraulic unit with 6 hp volume pump 7 hp-3600 rpm high pressure pump

PARTE: 12132 - ENGOMADORA 1 LADO – 63” ANCHO - QUICK COMO NUEVA – NUNCA USADA Width capacity: 63" Maximum opening: 1-3/4" Feed rate: 64 FPM (single speed) 8.27" diameter grooved acid and heat resistant SBR rubber covered glue rolls 6.9" diameter hard rubber covered doctor rolls Glue spread and material thickness are manually adjusted made by turning chrome plated hand wheels Aluminum drip pan catches clean up water Powered by 2 HP motor Includes roll guards...

PARTE: 12131 – LIJADORA BANDA ANCHA – SUPERIOR E INFERIOR – 52” ANCHO - TIMESAVERS USADA – EN BUENAS CONDICIONES 3 lijas superiores y 3 lijas inferiores Constant passline (38” height). This unit is ideal for sanding heavy panels Bottom Head first: 1st Head 60 HP 80/70 durometer Contact Drum, 2nd head 50 HP 80/70 durometer contact drum, 3rd head 40 HP Platen 96” long Conveyor between machines driven by the top head machine Top Head 1st Hea...

PARTE: 12130 – LIJADORA DE BANDA ANCHA – LIJAS INFERIORES – 1150 MM ANCHO - COSTA USADA – BUENAS CONDICIONES working width 1150 mm. roller roller brush CE rules year 1996 volt. 380/50 KW 131

PARTE: 12129 – LIJADORA DE BANDA ANCHA – LIJAS SUPERIORES - 1150 MM ANCHO - COSTA USADA – BUENAS CONDICIONES working width 1150 mm. roller roller roller CE rules year 1996 volt. 380/50 kw 131

PARTE: 12128 - ENGOMADORA 2 LADOS – BLACK BROS – ANCHO 68” USADA – MUY BUENAS CONDICIONES - REACONDICIONADA Width Capacity: 68" Grooved, Rubber-Covered Applicator Rolls Applicator Roll Diameters: 7.75" Main Motor: 1.5 HP, 208-230/460v, 3ph Hard Rubber-Covered Doctor Rolls Top-Elevator Style (Constant Pass-Line) w/ Manual Hand-Crank for Thickness Adjustment Mechanical Digital Readout for Thickness Currently 460v, 3ph (Ask about Voltage Change)

PARTE: 12127 - ROUTER PIN INVERTIDO - CR ONSRUD 36210 USADO – EN BUENAS CONDICIONES – LIMPIADO Y REVISADO 230V, 3 PH, 60 CY 10 HP motor, belt driven to spindle 25,000 RPM spindle speed Pneumatic spindle and guide pin movement via foot pedal 3" spindle travel 43" x 31" acrylic topped table 36" throat depth 3-Position adjustable depth stop, infinitely adjustable Maximum workpiece/template height is 4" 3/4" max. Chucking capacity Magnetic starter with over...

PARTE: 12126 - ROUTER PIN INVERTIDO - CR ONSRUD 3025 USADO – EN BUENAS CONDICIONES – LIMPIADO Y REVISADO 230V, 3 PH, 60 CY 5 HP motor, belt driven to spindle 20,000 RPM spindle speed Pneumatic spindle and guide pin movement via foot pedal 3" spindle travel 24" x 36" acrylic topped table 30" throat depth Three position adjustable depth stop 1/2" max. chucking capacity "Fog Mist" lubricated spindle system Automatic pre-lubrication of spindle bearings (each...

PARTE: 12092 - PINCH ROLLER – MIDWEST 2150USADA - EN BUENAS CONDICIONES

PARTE: 12118 – PEGADORA DE TABLEROS – 6 SECCIONES – TAYLORUSADA – EN BUENAS CONDICIONES6 SECCIONES, 36 PRENSAS EN TOTALPRENSAS 36” LARGOMANUAL, NO ELECTRICALA ENGOMADORA EN LA FOTO NO ESTA INCLUIDA

PARTE: 12117 – GUILLOTINA – JOSTING 2600 MM LARGO USADA – EN BUENAS CONDICIONES Extra blade 3 phase 230v 30 inch approximate automatic fence Green laser light on cut Excellent working condition Video 1 https://vimeo.com/466952870 Video 2 https://vimeo.com/466953105 Video 3 https://vimeo.com/466953026

PARTE: 12060-15 - SIERRA INGLETERA DOBLE – 10 PIES LARGO – WEGNOMAUSADA - EN BUENAS CONDICIONES

PARTE: 12098 – ASTILLADORA – 30 HP, 3 FASES, 460V – ABERTURA 24” X 41” – WEIMA En excelentes condiciones Limpiada y checada Solo 725 horas Vertical Feed 30 HP rotor motor 1.2 HP hydraulic unit 24" x 41" hopper opening .8 cubic yard hopper 10" diameter rotor with 28 index-able knives Rotor speed: 100 RPM Output: 400 to 1000 lbs/hr (depending on screen size and material) 1-3/8" diameter screen size Separate electrical panel 160 mm dia...

PARTE: 12074 – CEPILLO 2 LADOS – CABEZALES HELICOIDALES INSERTOS - 24" ANCHO - NORTHTECHUSADO - EN MUY BUENAS CONDICIONESUSO RUDOCABEZAL SUPERIOR 30 HPCABEZAL INFERIOR 25 HPMOTOR ALIMENTACION: 5 HPCABEZALES 5000 RPMVELOCIDAD VARIABLE 25 - 95 FT/MIN   ESPESOR DE TRABAJO 10 - 155mm (3/8” - 6-1/2”)15” min working length - 24” maximum widthMANUFACTURA 2005FEATURES:Carpet feeding spike system with 1100 spikesMechanical variable speedDigital control panel with 3 amp metersChrome bed ...

PARTE: 12043 – ENCHAPADORA CEHISA EP-9UsadaEn buenas condiciones

PARTE: 12030 – ENCHAPADORA CEHISA - EP-8 Usada – Buenas condiciones Model: EP-8 Serial #: 2807 Approx. Shipping Weight: 2,500 Lbs. Approx. Shipping Dimensions: 132″ L x 60″ W x 72″ H Specifications: Edgeband Thickness Max.: 3/16″ Solid Wood Coil Cutoff Max.: 2.5mm PVC Panel Length Min.: 5″ Panel Width Min.: 3″ Panel Thickness Min.: 3/8″ Panel Thickness Max.: 2″ Feed Speed: 33 FPM Feed Motor: 1HP Pressure Section: 1 Mot...

PARTE: 12040 – ESPIGADORA DOBLE DE CADENA - SCM EN BUENAS CONDICIONES DE OPERACIÓN MOTORES 220/440V 3 FASES, CONECTADA A 220V 3 FASES SIERRA CORTE A LARGO PERFILADOR ARRIBA PERFILADOR ABAJO