Identificador: 2628
Abierta
Descripción
PARTE: 2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”
Nueva con garantía
Features
Standard dies: 1〞,1-1/4〞,1-1/2〞,1-7/8〞
Wall thickness: 0.04〞-0.19〞
Hydraulic power drive, PLC Control
Bending workpieces such as low carbon round tubes, stainless round tubes, square tubes, and round steel bars to achieve desired shapes.
The equipment features "one-touch" operation on a single workpiece and data-program controlled mass processing.
Easy to operate, reasonable in composition, and low power consumption with high work efficiency.
Technical Specifications
Dimensions of Workpieces：
Round pipe： Max. 2” Min. ：5/8”
Stainless steel pipe： Max.1-1/2” Min. ：5/8”
Square pipe： Max. 2x2" Min. ：5/8”x 5/8”
Angle of Bending：180°
Rate of Main Shaft Rotation r/min : 5
Performance of Motor : 2.2 kW 1400 r/min
Hydraulic Motor for Specific Purpose ：1.1kW 1400 r/min
Packing Size ：57x27x46 in
N.W./G.W. : 1212 kgs / 1366 lbs
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12462 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
PARTE: 12462 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960USADA – MUY BUENAS CONDICIONESMFG: 2001460V, 3 FASES, 60 HZ
R 960
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...
AMXmachinery
SIERRA MULTIPLE - DIAMETRO DISCOS 12” - 18”
PARTE: 2TA-TRS-5112 - SIERRA MULTIPLE - DIAMETRO DISCOS 12”
- 18”Nuevo con garantíaOpcional:Luz laser
Alimentador 103” largo- Lenght of infeed fence 2630 mm- Fence R & L moving distance 250 mm- Width of roller 350 mmVideo: https://vimeo.com/715804763Features:Designed to meet the exacting standards
required for high quality production line use. Manufactured to precise tolerances and feature the newest designs for
operator safety and volume production. All these features...
-500x500.jpg)
AMXmachinery
SIERRA VERTICAL - 64" ALTO X 120" ANCHO
PARTE: 2SS-H5 – SIERRA VERTICAL – MOTOR 3 ¼ - CAP. 64” ALTO X 120” LARGO – 1 ¾ “ espesorNUEVA CON GARANTIACORTE VERTICAL: 64"CORTE HORIZONTAL: 120" SIN LIMITEESPESOR CORTE: 1-3/4"DIAMETRO SIERRA: 8"MOTOR: 15 AMP, 120V, 220VLARGO DEL MARCO: 120"DATOS DE ENVIOPESO: 298 LBSDIMENSIONES: 120 X 11 X 83 PULGADAS