Identificador: 2892
Abierta
.PNG)
Descripción
PARTE: 2RI-R300V - ARMADORA DE PUERTASTechnical Data and Specifications:
Is designed for high and low volume production requirements. Is the largest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assembly. The multiple pneumatic clamps ensure high clamping pressures on the piece.
Standard Features:
- 6' X 12' Vertical Assembly Easel
- 17° Easel Angle
- (10) Universal Clamping Cylinders & Manifold
- Squaring Bars on Left and Right Sides
- (4) Material Hold Down Dogs
- (3) Adjustable Material Positioning Stops
- 2" Cylinder Position Grid Pattern
- 3" Bore Clamp Cylinder Housing
- Heavy Duty Steel Frame
- Perforated Steel Table
- 12 port Manifold with 1/4" NPT Regulator/Gage
- Adjustable pressure from 20 to 130 PSI
- Foot Treadle
Technical Data and Specifications:
- Usable Table Area: 139" x 70"
- Work Height: 16"
- Footprint: 144" L x 27" D x 85" H
- Electrical: N/A
- Air: 80-100 PSI
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 12GA
PARTE: 2GM-0412E - DOBLADORA DE METAL 4' X 12GA This machine has a 2HP Motor, rated at 220V/440V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is ...
AMXmachinery1
ARMADORA DE PUERTAS
PARTE: 2RI-R375V - ARMADORA DE PUERTASIs designed for high and low volume production requirements. Is the mid-size version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square asse...
-500x500.jpg)
AMXmachinery1
ENGOMADORAS 1 Y 2 LADOS – CAPACIDAD ANCHO 24" - 60”
PARTE: 2LO-GS-24RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 24”PARTE: 2LO-GS-36RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 36”PARTE: 2LO-GS-48RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 48”PARTE: 2LO-GS-60RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 60”
Nueva con garantíaRoller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and botto...
-500x500.png)
AMXmachinery1
CENTRO DE CORTE 5 EJES
PARTE: 4ST-MV 520 - CENTRO DE CORTE 5 EJESProductivity, precision, automation.Is designed for manufacturers of timber-framed houses and TRUSS trusseswho require speed, repeatability and digital integration.5-axis technology for complex cutsThe cutting unit rotates 360° and tilts ±90°, easily performing:- Straight cuts- Angled cuts- High-precision compound cutsPerfect for beams and structural components with variable geometries.Patented handling for maximum speedThe independent dual-belt clamp...