Identificador: 2892
Abierta
.PNG)
Descripción
PARTE: 2RI-R300V - ARMADORA DE PUERTASTechnical Data and Specifications:
Is designed for high and low volume production requirements. Is the largest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assembly. The multiple pneumatic clamps ensure high clamping pressures on the piece.
Standard Features:
- 6' X 12' Vertical Assembly Easel
- 17° Easel Angle
- (10) Universal Clamping Cylinders & Manifold
- Squaring Bars on Left and Right Sides
- (4) Material Hold Down Dogs
- (3) Adjustable Material Positioning Stops
- 2" Cylinder Position Grid Pattern
- 3" Bore Clamp Cylinder Housing
- Heavy Duty Steel Frame
- Perforated Steel Table
- 12 port Manifold with 1/4" NPT Regulator/Gage
- Adjustable pressure from 20 to 130 PSI
- Foot Treadle
Technical Data and Specifications:
- Usable Table Area: 139" x 70"
- Work Height: 16"
- Footprint: 144" L x 27" D x 85" H
- Electrical: N/A
- Air: 80-100 PSI
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
CEPILLO 1 CARA - 26" ANCHO
PARTE: 2EX-XP-126T - CEPILLO 1 CARA - 26" ANCHOComes in 24″, 26″, 30″ & 40″ width. Is available with VECTOR Cutterhead, infeed roller, heavy duty internal drive system, and a PLC controller.Available with VECTOR, STEALTH, MACH or straight knife cutter heads 11-3/4” thickness capacityHigh Horsepowers: 20 HP & 15 HP6000 RPM cutterheadPowered top and bottom bed rollersMotorized table elevationDigital thickness controllerSolid cast-iron constructionTriple v-beltsSectional chipbreakers Ex...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...
AMXmachinery1
SIERRA TRONZADORA - DISCO 14" - 5 HP
PARTE: 2CK-PCS14 - SIERRA TRONZADORA - DISCO 14" - 5 HPIs the ideal solution for increasing production on crosscut operations while maintaining optimum safety. Its powerful 5HP motor and adjustable cutting stroke ensure it can effortlessly cut though a wide range of materials and dimensions. A number of features are included to ensure safe operation such as the infeed/outfeed safety guard, microswitches on all access doors, and security bolt on the saw access door. Available in either left hand ...
-500x500.png)
AMXmachinery1
TALADRO DOBLE FILA - 46 HUSILLOS
PARTE: 2RI-R46 - TALADRO DOBLE FILA - 46 HUSILLOSDescription:Iis ideal for cabinet and closet system panels requiring more than two rows of system holes for hardware functions. Drills two rows of shelf pin holes simultaneously. The fixed position top drilling heads provide rigid panel control for precise hardware system hole location. Single point panel referencing fence accurately locates all hardware system holes from the fence with the use of fence mounted stops and indexing pins. Linear be...