ID: 1935
Open
Description
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
REDUCTOR DE VELOCIDAD - 1 HP - 30.1
PARTE: AMX-10150 - REDUCTOR DE VELOCIDAD - 1 HP - 30.1
USADO - BUENAS CONDICIONES
MOTOR 1
HP, 208-230/460V, 3.6/3.6 AMP
MAX
OUTPUT TORQUE: 1260 LBS
GEAR
RATIO: 30.1
MAX INPUT
HP 1.5 AT 1750 RPM
TYPE: QC
US ELECTRICAL MOTORS
MEDIDAS: 17” LARGO X 9” FONDO X 9”
ALTO
AMXmachinery
CONVERTIDORES DE FASES - DE 220V 2 FASES A 220V 3 FASES
PARTE: 2PH-GPPL - CONVERTIDORES DE
FASES - DE 220V 2 FASES A 220V 3 FASES
NUEVOS CON GARANTIA
Rated
for any environment, indoor/outdoor.
Designed
to work for voltage-sensitive equipment.
INPUT:
208-250V - 50/60 hz Single Phase
OUTPUT
208-250V - 50/60 hz Three Phase
Includes
Start and Stop with a built-in contactor, and a Voltage Meter Display
TAMANOS:2
HP
3
HP
5
HP
7.5
HP
10
HP
15
HP
20
HP
30
HP
40
HP
50
HP
60
HP
75
HP
10...
AMXmachinery
PARTE: AMX-10131 - EXTRACTOR DE TUBO - ASPAS 12” DIAMETRO - MOTOR 1/2 HP - CINCINNATI FAN
PARTE: AMX-10131 - EXTRACTOR DE TUBO - ASPAS 12”
DIAMETRO - MOTOR 1/2 HP - CINCINNATI FAN
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 280/440V, 3 FASES
MEDIDAS: 12” DIAMETRO INTERIOR X
14” DIAMETRO EXTERIOR X 20” FONDO
HECHO EN USA
6,500.00 MXN
-500x500.jpg)
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2TA-DS-2500 - LIJADORA DE TAMBOR LOBO/CASTALY - 25" DE ANCHOPARTE # 2TA-DS-3700 - LIJADORA DE TAMBOR LOBO/CASTALY - 37" DE ANCHOCaracteristicas:- Easily operate with performance for sanding flat objects.- Heavy sheet metal cabinet stand.- Balanced cast aluminum sanding drums.- Two different grits and level sanding drums are designed for fast and fine finish at one pass.- First drum is cast aluminum; second drum is coated with rubber for fine sand paper.- Automatic feeding operates by non...