Identificador: 1935
Abierta
ID de articulo : # 1935 se ha agregado a su lista de deseos.
Descripción
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENGOMADORA 1 LADO – 63” ANCHO - QUICK
PARTE: 12132
- ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR
rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted
made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards...
AMXmachinery
PRENSA RADIO FRECUENCIA L & L
PARTE # 10108 - PRENSA RADIO FRECUENCIA L & LMAS INFORMACION POR LLEGAR
AMXmachinery
SIERRA DE MESA 10"
PARTE # SIL-DC-MBS250-1 - SIERRA DE MESA 10" - MOTOR 5 HP - 220V, 1 FASEPARTE # SIL-DC-MBS250-3 - SIERRA DE MESA 10" - MOTOR 5 HP - 220V, 3 FASENUEVA CON GARANTIA MOTOR: 5 HP, 220V, 60 Hz, 1 y 3 FASESDIAMETRO DEL DISCO 10"CAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 3"CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2"DIAMETRO FLECHA 5/8"VELOCIDAD DEL DISCO: 4200 RPMMEDIDAS DE LA MESA: 36" X 27"ALTURA MESA: 33-1/2"MAXIMO CORTE A LA DERECHA DEL DISCO: 25"PESO: 225 KGSTIPO DE EMPAQUE: 2 CAJAS
AMXmachinery
PARTE: 12186 - DOBLADORA DE TUBOS CNC – HIDRAULICA - CAPACIDAD DIAMETRO 6”
PARTE: 12186 -
DOBLADORA DE TUBOS CNC – HIDRAULICA - CAPACIDAD DIAMETRO 6”
Usada – Excelentes
condiciones
Right-hand
bending rotation
Z
shift, X shift