Identificador: 1935
Abierta
Descripción
PARTE: 2VE-VTH-35/8/2VU - ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR VTBRATORIO 16” LARGO
NUEVA CON GARANTIA
Application Description:
Type of material to be ground: Wood – Pine, kiln dried
Form of material to be ground: Rips from gang-rip, waste wood from cut-offs
Typical size of material to be ground: < 5” x 18” x 16’
Required volume of material to be ground: 1,000 lbs/hr
Desired screen or particle size: 3/4”
Use of ground product: Not Specified
SPECIFICATIONS
Machine Infeed Opening: 3.5” H x 14” W
Rotor Length: 14”
Rotor Diameter: 12”
Number Of Cutters: 18 (40 mm x 40 mm)
Rotor Speed: 390 rpm
Infeed Conveyor: 16’ Vibratory Conveyor
Drive Motor HP: 40
Voltage: 460V/3ph/60Hz
NOTE: A throughput rate in excess of 1,000 lbs/hr through a 3/4” screen is achievable dependent on the type of material, form of material, screen size and method of feeding.
Throughput estimates are based on maximum obtainable rates and may vary according to material types and screen sizes.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - LARGO 6” - FLECHA 1-13/16" - FLECHA 2-1/8"
PARTE: 12305 -
CABEZALES PARA MOLDURADORA - LARGO 6” - FLECHA 1-13/16" - FLECHA 2-1/8"SIN BUJE FLECHA 2-1/8"
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha: 1-13/16"
Diámetro exterior: 6” (150 mm)
Largo
6” (152 mm)
AMXmachinery
GUILLOTINA CHAPA 1 NAVAJA
PARTE # 3NN-CUTMATE3200 – GUILLOTINA PARA CHAPA – 1 NAVAJA - 3200 MMPARTE # 3NN-CUTMATE2800 – GUILLOTINA PARA CHAPA – 1 NAVAJA - 2800 MMSpecificationsModelCutMate 3200CutMate 2800Cutting Length3200 mm2800 mmDaylight Opening120 mm120 mmElectric Powerapprox. 7.5 kwapprox. 7.5 kwCutting Width25 ~ 650 mm25 ~ 650 mmPack Beam Width150 mm150 mmDimensions (L x W x H)5000 x 1750 x 1850 mm4600 x 1750 x 1850 mmNet Weightapprox. 4800 kgapprox. 4450 kgColorRAL 8019 / RAL 9003RAL 8019 / RAL 9003 Than...
AMXmachinery
PARTE: 12185 – FORMADORA TUBOS – REDUCE Y EXPANDE – CAPACIDAD 6”
PARTE: 12185 – FORMADORA TUBOS – REDUCE
Y EXPANDE – CAPACIDAD 6”
USADA – MUY BUENAS CONDICONES –
RECONSTRUIDA EN 2020
AMXmachinery
PARTE: 12495 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 950
PARTE: 12495 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 950
USADA – MUY BUENAS CONDICIONES
WEINIG RONDAMAT R-950
MFG: 1999
230V, 3 FASES, 60 HZ
PESO 1200
LBS1 FLECHA INCLUIDA
DE 1.5” DIAMETRO
Magnetic
on/off control
Cleaned,
checked