Identificador: 2903
Abierta
.PNG)
Descripción
PARTE: 2RI-R130 - BARRENADORA HORIZONTAL - 1 HUSILLOTechnical Data and Specifications:
Description:
Designed for a dedicated and accurate boring center with single, double or triple spindle boring capability. Stile and rail boring set-up features help eliminate costly mistakes, rejected parts and increase production efficiency. The workpiece is held firmly against the table by a pneumatic clamp, and there is full adjustability of the index stops, bed height, and depth of cut.
Standard Features:
- Single spindle head
- 7/16-14 Female Threaded Collet
- 0.75 HP Spindle Drive Motor, TEFC
- 0-2" Adjustable Boring Depth
- (4) Material Positioning Stops
- 2" Bore Clamping Cylinder
- Foot Actuated Boring Cycle
- 3450 RPM Spindle Speed
- 6" X 20" Table Area
- Tooling Not Included
Technical Data and Specifications:
- Electrical: 110/120V, 60Hz, 10A
- Air: 2 CFM at 80 – 100 PSI
- Work Height: 40"
- Footprint: 24" x 24"
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORA
PARTE: 2TA-WG-2404HC - ASTILLADORA - HORIZONTAL - 24 X 4 PULGADAS - CON BANDA TRANSPORTADORAFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting ...
AMXmachinery1
EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA
PARTE: 1AM - EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA-FABRICADAS EN ACERO INOX. P3, GRADO ALIMENTICIO - PARTE FRONTAL, LATERALES, TECHO Y FILTROS EN LAMINA
CAL. 20 CON GOTERÓN EN LAMINA CAL. 18 - SOPORTA FILTROS Y RESPALDO EN LAMINA GALVANIZADA - INCLUYE FILTROS TIPO LABERINTO
- INCLUYE CAPELOS PARA ILUMINACIÓN - NO INCLUYE DUCTERÍA NI EXTRACTOR
Cantidad de
Capelos
Largo
1
1 m
2
1.5 m
...
AMXmachinery1
TALADRO MULTIPLE - 21 TALADROS
PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision boring head has interlocking steel ...
-500x500.png)
AMXmachinery1
CABEZAL DE CORTE PLANO HIDRAULICO
PARTE: 3CH-HFB - CABEZAL DE CORTE PLANO HIDRAULICOCan be fits in general 4-side high speed moulders/planers.