ID: 3057
Open
.PNG)
.PNG)
Description
PARTE:3HO-HT450CF - CANTEADORA AUTOMATICA
The single-sided edge banding machine is designed for bonding rectangular workpieces with various edge materials: PVC, ABS, acrylic.
| Banding Tape Thickness | 0.3-3mm |
| Banding Tape Width | 12-65mm |
| Workpiece Thickness | 10-60mm |
| Workpiece Length | >=80mm |
| Workpiece Width | >=60mm |
| Feeding Speed | 18/20/22mmin |
| Heating Power | 1.8kw |
| Feeding Motor Power | 3.7kw |
| Glue Spreading Motor Power | 0.75kw |
| End Trimming Motor Power | 0.37kw x 2 |
| Rough Trimming Motor Power | 0.75kw x 2 |
| Fine Trimming Motor Power | 0.75kw x 2 |
| Corner Rounding Motor Power | 0.37kw x 2 |
| Polishing Motor Power | 0.18kw x 2 |
| Workpiece Pressing Beam Lifting Motor Power | 0.37kw |
| Air Pressure | 0.8-1Mpa |
| Overall Dimension | 5700×850×1450mm |
| N.W. | 2400kgs |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
TALADRO BASTIDOR - 1 BROCA
PARTE: 2SS-SPM301 - TALADRO BASTIDOR - 1 BROCAUnlike others of its kind, it features cam-driven action providing fast, smooth cutting action under complete mechanical control throughout the machine cycle. it's mechanical linkage allows the pilot drill and router bit to cut at the same time, reducing cycle time without sacrificing cut quality. Simple back fence, stop rail, and depth adjustment make setups and adjustments quick and easy. The built-in analog depth gauge allows changing material ...
-500x500.png)
AMXmachinery1
SISTEMA DE ENTRADA PARA MOLDURADORA - ALIMENTADOR
PARTE: 2LE-004 - SISTEMA DE ENTRADA PARA MOLDURADORA - ALIMENTADORIncreased productionLower labor requirementsErgonomic designThe Hopper Feeder continuously feeds work pieces into a moulder. The boards are manually placed in a vertical accumulation Hopper. A web top conveyor belt separates the work pieces at high speeds and feeds them into the moulder.
AMXmachinery1
TALADRO BASTIDOR DE MESA - 1 BROCA
PARTE: 2SS-SPM101EZ - TALADRO BASTIDOR DE MESA- 1 BROCAThe screw pocket machine drills a pilot hole while machining a six degree screw pocket with dual routers and an easy action lever. An “EZ” action lever allows operators to pocket as material allows in two movements, without the need for finding a neutral position.Key features of this machine include:Machining a 6° pilot hole and a screw pocket in one “EZ” motion.An “EZ” action lever allowing operators to pocket as quickly as ...
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE: 2PI-HP5D - ESPIGADORA HORIZONTALIs designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the cen...