Identificador: 2841
Abierta
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2MK-CP/1.C - COLECTOR DE POLVOS - 1HP
Is Ideal for collecting light powder from small machines, it has an adapter that can be attached to the end of the hose making it easier whenever cleaning the floor.
| Technical Information | |
|---|---|
| Motor Specs | 1 HP 1 PHASE 127 V – 16 A |
| Air Flow Capacity | 600 CFM |
| Bag volume | 60 L (2.12 ft³) |
| Number of Inlet | 1 |
| Inlet Size | 4" |
| Filtration | 1 micron |
| Bag size | 14" x 25" | 371mm x 635mm |
| Weight | 73 Lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA RAJADORA - 1 DISCO - 14"
PARTE: 2EX- XR-14BX - SIERRA RAJADORA - 1 DISCO - 14"Details:15 HP Main motorHuge 45″ x 61″ table available6 full hold down rollersVariable feed speeds from 50-120 ft/min8′ Guaranteed Glue LineDisc BrakesMicro adjust fence with handwheelTriple anti-kickback fingers18″ wide ripping capacityAutomatic Oiler with low-oil warningWye-Delta soft startHeat treated chain and raceAmp meterSquare D Electrical controlsSpecifications:Horsepower: 15HPVoltage: 230V or 460VPhase(s): 3PHBlade Size: 14"M...
AMXmachinery1
SIERRA CINTA 37" - 2 EN 1 - 10HP
SIERRA CINTA 37" - 2 EN 1 - 10HP - 2CK-HB950AIs a heavy duty bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it can also b...
AMXmachinery1
ALIMENTADOR - 5 RUEDAS - CON BANDA
PARTE: 2CK-AF04Is specifically designed for feeding small workpieces which can not be fed properly using a conventional 3 and 4 roller feeders. The (3) synthetic rubber belts run on (5) feeder wheels which are closely coupled together. The result is the workpiece is held between the rollers allowing for the feeding of short and/or small material. The universal stand allows you to easily adjust the height and position of the feeder. It can also be positioned from a horizontal to vertica...