Identificador: 2339
Abierta
.PNG)
.jpg)
Descripción
PARTE: 2CK-UFO102B - COLECTOR DE POLVOS - 3HP
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- 3HP generating 1883 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- CSA / UL magnetic starter included
- 3HP Motor
- 1883 CFM
- 6” main inlet with removable outlet with (3) 4” ports
CFM | 1883 CFM |
Motor | 3 HP |
Main inlet diameter | 6″ |
Connector inlet diameter | (3) 4″ |
Bag Volume | 10.48 cubic feet |
Static pressure of water | 9.26 inch |
Top bags (2) | 18.9″ x 31 ½” |
Bottom bags (2) | 18.9″ x 31 ½” |
Electrics | 230/1/60 = 17 Full Load Amps |
Net weight | 169 lbs |
Shipping weight | 180 lbs |
Shipping dimensions | 48″ x 23″ x 23″ |
Noise Level | 80dB |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ASTILLADORA - 41 PULGADAS
PARTE: 2LO-WG-4150 - ASTILLADORA - 41 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cobs, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of ...
-500x500.png)
AMXmachinery1
CENTRO DE CORTE 5 EJES
PARTE: 4ST-MV 520 - CENTRO DE CORTE 5 EJESProductivity, precision, automation.Is designed for manufacturers of timber-framed houses and TRUSS trusseswho require speed, repeatability and digital integration.5-axis technology for complex cutsThe cutting unit rotates 360° and tilts ±90°, easily performing:- Straight cuts- Angled cuts- High-precision compound cutsPerfect for beams and structural components with variable geometries.Patented handling for maximum speedThe independent dual-belt clamp...
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE: 2PI-HP5D - ESPIGADORA HORIZONTALIs designed to machine parts used in TFL (thermally fused laminate), TFM (thermally fused melamine), paper wrapped, vinyl wrapped or thermofoil doors.Is a horizontal point to point bore and dowel insertion and panel groove machining center. It is designed to CNC position a drill spindle, bore a hole, then CNC position the dowel inserter, inject glue or water (for pre-glued dowels), and insert the dowel into the hole. As well as cut a panel groove in the cen...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 4' X 1/4''
PARTE: 2GM-0425E - DOBLADORA DE METAL 4' X 1/4'' This machine has a 4HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...