Identificador: 2556
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2GM-PS-4816GT - CORTADORA DE METAL ESTILO GANG
48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phase
with NC programmable cut to length, 5” touch screen
- ISO 9001 certified
- American design and Taiwan quality machine
- Slit and cut to length in one unit
- NC programmable cutting length, 100 job memory feature
- Single cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.
- Auto cycle mode-shearing will auto cycle the programmed cut lengths.
- Easy removal of slitting blades for cut to length operations without slitting.
- feed the sheet metal from the manual decoiler to cut to length without slitting blades
- 5” Omron touch screen
- 3-1/8” diameter shafts mounted in precision ball sealed bearings
- Slitting blades are dual edged
- Safety type foot pedal control
- One year warranty for parts
- Comes with 6 sets of slitting blades to slit max 7 trips, change it to 7 strips
- full length finger guard
- Removable safety foot pedal control
- One set of upper & lower shearing blades
Specifications: | PS-4816GT |
Slitting and shearing capacity: width x thickness mild steel(hot roll) Tensile 60,000PSI stainless steel & cold roll, tensile 85,000PSI soft aluminum, tensile 28,000PSI min. thickness Max. slitting length |
48”x16Ga 48”x20Ga 48”x12Ga 30Ga 20ft, NC programmable |
Shearing blade length | 50” |
Shearing blade rake angle | 2 degree |
Infeed/outfeed table height | 32” |
Slitting blades | 6 pairs |
Slitting feed speed Shearing stroke | 57 FPM 35 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 15 HP
PARTE: 2CK-DBS15 - COLECTOR DE POLVOS - 15 HP Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP. Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units. The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump the wood was...
AMXmachinery1
CENTRO DE TRABAJO PARA CASAS DE BLOQUES
PARTE: 4ST-BIGBLOX - CENTRO DE TRABAJO PARA CASAS DE BLOQUESProduct DescriptionWorking centre for Block-House type log houses and wood cabins.Maximum workpiece dimensions 270 mm (width) x 320 mm (height)Minimum workpiece dimensions 140 mm (width) x 120 mm (height)Beam movement accomplished manually, with adjustable mechanical stops.4 The working centre is equipped with the following standard units:Horizontal and vertical notching unit (standard)Cross-cutting unit with a blade diam. of 800 mm (op...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA Y FRENO 6 PIES
PARTE: 2GM-HBB-0610 - CORTADORA DE METAL HIDRAULICA Y FRENO 6 PIES Our 6 FT Sheet Metal Hydraulic Box and Pan Brake is a heavy duty hydraulic box and pan brake; constructed of steel for maximum rigidity. Equipped with a robust and quiet German Rexroth hydraulic logic system to clamp your workpiece with ease. Our box and pan brakes are made for simple operation with a conveniently located control panel to place on either side of the hydraulic brake.Taiwan MachinesI...
-500x500.png)
AMXmachinery1
SIERRA CINTA 24"
PARTE: 2CK-HB600R - SIERRA CINTA 24" Incorporates a robust design with economical price point. With its industrial cast iron wheels and table assembly it can handle any job. With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements. The upper and lower blade guides provide maximum stability no matter the blade you are cutting with. This bandsaw delivers high accuracy for maximum production along with a simple d...