Identificador: 2600 Abierta

DOBLADORA DE METAL 5' X 10GA

AMXmachinery1

Contacte al Vendedor

Descripción

DOBLADORA DE METAL 5' X 10GA PARTE: 2GM-0510E

This machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.

SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is powered)Heavy duty casting frameHeavy duty all steel welded construction1/3 of full length in middle of roller is straight, and two ends with crown to get perfect round performance.Quiet running operationEasy swing-out top rollerSafety line all around the machine for emergency stopAll rolls run forward and reverseSafety type forward/reverse foot pedalPower source 220V, (option: 440V, 3 phase)Adjustable cone attachment3/8”, ½” and 5/8” grooves on rollersAll (3) hardened rollsRemovable safety foot pedalOperation & parts manualOrange color front cover is optional.E models come with motorized bending roll up/down w/ push button and digital display for easy operation of repeat jobs

Capacity: Mild Steel Stainless Steel soft aluminum min. thickness	5'1" x 10Ga. 5'1" x14Ga. 5'1" x 1/4" 26Ga

Roll Dia.	4 3/4"
Min. Bending Dia. Inch	6"
Pre-bend inch	0.12"
Rolls Speed ft/min	20
Rolls Opening	1/2"
Main Motor	3HP 3PH 220V or 440V
Weight	3,050 lbs.
Overal Dimensions	96" x 32" x 52"

Pago y Devoluciones

Forma de pago: N/A

Publicar mensaje

Ingresar to ask the seller a question.

AMXmachinery1

PARTE: 2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESOR

PARTE: 2CK-HR12E - REASERRADORA HORIZONTAL - 1 BANDA - 20 HP – 11.8” ANCHO X 4.92” ESPESORNUEVA CON GARANTIA 2 OPCIONES: 230/1/60 - 460/3/60Can produce a cut up to 11.8” wide and 4.92” thick. Capable of handling material from 11.8” wide to 9.8” thick. The powerful 20HP motor makes easy work of even hard to cut wood material. The thin kerf 1” wide blade achieves optimum cut quality while maximizing material yield. The user-friendly controls and operation make will all...

AMXmachinery1

CIERRA CINTA 37" 2 EN 1

CIERRA CINTA 37" 2 EN 1 PARTE:2CK-HB950AIs a heavy duty bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease. With a large cutting height capacity under the guide of up to 22” it can also b...

AMXmachinery1

ARMADORA DE CAJONES

ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...

AMXmachinery1

TORNO 14'' X 40''

TORNO 14'' X 40'' PARTE: 2GM-1440BGF-3ISO 9001 certifiedLifetime Tech Support by phone and videoFull Geared-head precision Metal Lathe with foot brakeQuick-change gearbox with fast and easy threading set up3 HP heavy duty main motor runs on 220V Single-Phase power1.5” Spindle boreSpindle Nose D1-4 CamlockHeavy Duty guideway; 7.5” width8 spindle speeds ranging from 70-2,000 RPM56 kinds of imperial threads44 kinds of metric threadsSpindle is balanced, ...

Ver todos