Identificador: 1755
Abierta
Descripción
PARTE: 2CK-CT108
Has a 6” x 108” long belt with 39” wide platen for straight edge sanding and 3” drum for curve sanding. Table are adjustable up and down and can be angled for full belt utilization. This is the ideal edge sander for sanding cabinet door edges, furniture components, and more.
- Large front table can be tilted and adjusted in height to utilize the full width of the sanding belt
- Side table is supplied for sanding curved components and can be adjusted in height
- Rugged heavy gauge steel base ensures stable and rigid performance during sanding operations
- Available in 1-phase (1 ½ HP) or 3-phase (2 HP)Fast and convenient adjustment for belt tension and tracking by
- adjustment knobs on the idler drum assembly
- Sanding belt safety guard
- CSA / UL approved magnetic starter
|
Sanding belt size |
6″ x 108″ |
|
Belt speed |
3150 FPM |
|
Motor (1 phase) |
1 ½ HP |
|
Motor (3 phase) |
2 HP |
|
Front table |
37″ x 7 ¾” |
|
Side table |
19″ x 12″ |
|
Platen size |
6 7/8″ x 39″ |
|
Dust outlet |
4″ |
|
Machine weight |
364 lbs. |
|
Machine dimensions |
64 ½” x 22 ½” x 44″ |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE - 3 RUEDAS
PARTE: 2CK-DC30Is a safe and powerful feeding unit for shapers, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The DC brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job. The universal stand allows for quick positional adjustment from a horizontal to vertical positioning and everything in b...
AMXmachinery1
TALADRO MULTIPLE - SISTEMA 29
PARTE: 2JG-MAG-SYSTEM29 - TALADRO MULTIPLE - SISTEMA 29Provides a 29 spindle 32 mm universal drilling solution, with horizontal and vertical boring capabilities and pneumatic tilting of the boring unit with locking points from 0 to 90 degrees for quick set-up at any angle.Accurate positioning of the boring unit to the table with digital readout.0 to 2.5" adjustable drilling depth with patented spiral setting device.(3) patented quick release material clamps with auto-setting to firmly hold ...
-500x500.png)
AMXmachinery1
CANTEADORA AUTOMATICA
CANTEADORA AUTOMATICA PARTE: 2CK-MX350MRIs an entry-level edgebander with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system which can either...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 3HP
COLECTOR DE POLVOS - 3HP - 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.3HP generating 1883 CFMBase is mounted on casters so...