Identificador: 1698
Abierta
Descripción
PARTE: 2CK-DT-1128A
|
Range of cutter diameter |
1” to 6” (changeable) |
|
Table diameter |
18” |
|
Table speed |
1.5 ~ 4.0 RPM (4 speeds) |
|
Spindle diameter |
30 mm |
|
Spindle speed |
9000 RPM |
|
Cutter size |
100 mm |
|
Spindle height |
4” |
|
Follower roller diameter |
100 mm x 1 |
|
Table drive motor |
1 hp |
|
Spindle motor |
5 HP x 1 |
|
Working speed |
5~6 times/minutes |
|
Net weight |
1,000 kgs |
|
Gross weight |
1,100 kgs |
|
Packing size |
230” x 160” x 210 cm |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
TORNO 16'' X 40''
TORNO 16'' X 40'' PARTE: 2GM-GML-1640HDISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece solid cast iron machine baseHeavy Duty guideway width 10-1/4”Heavy Duty main motor 6 HP16 spindle speeds from 45-1,800 rpm, speeds: 45/70/90/108/140/165/215/255/330/385/510/585/770/900/1170/1800rpm45 kinds of inch threads, and 39 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, har...
AMXmachinery1
LIJADORA DE BANDA VERTICAL - 3 HP
PARTE: 2CK-PW120EIs designed for the most demanding sanding applications. With its powerful 3HP motor it can perform under industrial requirements. The oscillating belt ensures optimum sanding quality and extended belt life. Its versatility lies in the number of functions which can be done on this single machine. The industrial cast aluminum table can be easily tilted with positive stops of 45° and -5° so you can easily sand straight or miter edges. Additionally, the front table is spring ...
-500x500.png)
AMXmachinery1
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD 26” X 120”
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD
26” X 120”
NUEVO
CON GARANTIAISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by high precision bearings A...
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...