Identificador: 1997
Abierta
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
AMXmachinery
Descripción
PART: 1FJ-010-E - PALLER NOTCHER - DOUBLE - 2 MOTORS 15 HP - 9” LENGTH
New with warranty – 6-month warranty on manufacturing defects on mechanical parts only
Each notch 9" lenght standard
Production rate: 1 part every 3 seconds = 1,200 parts/hr. approximate
2 main motors: 15 HP, 220/440V each – used motor, checked and tested
Feed motor: 5 HP,220/440V – used motor, checked and tested
Machine dimensions: 96” length x 84” width x 48-1/2” height - Weight: 2,400 lb.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2TA-CM-200LG - PERSIANERA PARA HACER SHUTTERS
PARTE: 2TA-CM-200LG - PERSIANERA PARA HACER SHUTTERSFeatures:- A faster round louver groove mortise machine provides variable oscillating speed.- Distance between the slot is controlled by the template.- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.- Automatic pneumatic hold down clamps- Fully automatic mortise produce cycles.- Pneumatic pistons for drilling depth speed control, enable for best results.- Depth of mortising ...
AMXmachinery
PARTE: 12522 – LIJADORA DE BANDA ANCHA – 1 LIJA – ANCHO 36” – LAGUNA - CP 60
PARTE: 12522 – LIJADORA DE BANDA ANCHA – 1 LIJA – ANCHO 36” – LAGUNA - CP 60
USADA - BUENAS CONDICIONES
MOTOR 11 HP, 220V, 1 FASE
AMXmachinery
LIJADORA DE CEPILLOS – QUICKWOOD
PARTE: 12152 – LIJADORA DE CEPILLOS
– QUICKWOOD
480V,
60 HZ
MADE
IN ITALY
MFG
2001
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 3.68 LITROS
PARTE:
2PG-XPRESS-Q-11A - HORNO PARA CERAMICA, VIDRIO, METALES – 3.68 LITROS NUEVO CON GARANTIAThe Xpress-Q-11A fires rapidly to 2350F. Create breathtaking jewelry or small keepsakes using almost any medium you can imagine: silver clay, enameling, china painting, glass, lost wax casting, ceramics, stoneware, and porcelain. Since the kiln opens from the front instead of the top, it is ideal for copper enameling. The Xpress-Q-11A is a true multipurpose kiln.Imagine the glass you could sag, slu...