Identificador: 2284
Abierta
Descripción
PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A
USADA – MUY BUENAS CONDICIONES
Year: 2018
CAPABILITIES
-One-sided edgebander with glue pot
-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port
-Chain drive and upper presser
-Group of pressure rollers
Workstation :
-Premilling
-Gluing unit with pellet pot
-Adjustable pneumatic pressure unit
-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, motor 0.50Kw
-Fine trimming top and bottom trimming unit, 0.65Kw motor
-Radius scraper unit for 3mm pvc finishing
-Polishing brush unit, 0.37Kw motor
Specifications:
-Minimum & maximum thickness of the part: 10 to 60mm
-Minimum width of the part: 85mm
-Minimum piece length: 140mm
-Tape thickness in roll: 0.4 to 3mm
-Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
-Variable feed speed: up to 12m/min
-Edgebander length 16` and 6 inches
-Automatic start of the groups and motors foreseen in the program.
-2nd pass direct selection key.
-Management of 8 digital axes
-Lists of programs with manual and/or automatic launch.
-Diagnosis of errors with codes and comments.
-Statistical production data.
-This device is mounted on an adjustable suspended control panel
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12610 - SIERRA RAJADORA – 1 SIERRA – NORTHTECH
PARTE: 12610 - SIERRA RAJADORA – 1 SIERRA – NORTHTECHUsada – Buenas condicionesMotor principal 15 HP, 460/60/3 electricsModelo: SLR-12SCMfg. 2017
AMXmachinery
CABEZAL 10 HP
PARTE: 1SL-PS-100T - CABEZAL PARA COMPRESOR – 41 CFM - 10 HPNuevo con garantiaDesplazamiento de 41.0 CFM175 PSIPresión máxima de 175 PSI2 Cilindros de alta de 55 mm y 2 de baja de 105 mm
AMXmachinery
LIJADORA DE CEPILLOS – SLIPCON
PARTE:
12151 - LIJADORA DE CEPILLOS – SLIPCON
USADA – EN MUY BUENAS
CONDICIONES
- The patented combination of rollers and rotating / oscillating discs makes
the Perfection DBB 1350 sanding machine the ideal finishing solution for entry
doors, cabinet doors, drawer fronts, sheet goods, shutters, face frames,
furniture parts and much more.
- The sander works equally well for whitewood sanding and stain/sealer or
primer sanding. Can be used with both traditional and UV cured coat...
AMXmachinery
PARTE: AMX-10165 - EXTRACTOR DE PARED - 20” X 20” - S & P
PARTE: AMX-10165 - EXTRACTOR DE PARED - 20” X 20” - S
& P
USADO MUY BUENAS CONDICIONES
MODELO: HXB-4-400/20
3,600 M3/HR
MOTOR: ¼ HP, 127V, 1 FASE, 2.2 AMP
RPM: 1625
MEDIDAS: 20” X 20” X 10”Video: https://vimeo.com/870538431