Identificador: 2284
Abierta
Descripción
PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A
USADA – MUY BUENAS CONDICIONES
Year: 2018
CAPABILITIES
-One-sided edgebander with glue pot
-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port
-Chain drive and upper presser
-Group of pressure rollers
Workstation :
-Premilling
-Gluing unit with pellet pot
-Adjustable pneumatic pressure unit
-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, motor 0.50Kw
-Fine trimming top and bottom trimming unit, 0.65Kw motor
-Radius scraper unit for 3mm pvc finishing
-Polishing brush unit, 0.37Kw motor
Specifications:
-Minimum & maximum thickness of the part: 10 to 60mm
-Minimum width of the part: 85mm
-Minimum piece length: 140mm
-Tape thickness in roll: 0.4 to 3mm
-Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
-Variable feed speed: up to 12m/min
-Edgebander length 16` and 6 inches
-Automatic start of the groups and motors foreseen in the program.
-2nd pass direct selection key.
-Management of 8 digital axes
-Lists of programs with manual and/or automatic launch.
-Diagnosis of errors with codes and comments.
-Statistical production data.
-This device is mounted on an adjustable suspended control panel
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL
PARTE:
12264 - MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL
USADA - BUENAS
CONDICIONES
Mfg. 1995
6 heads, chrome beds, feed table,
6 8" heads
2 1/8" spindles
All paperwork
One owner machine, hardly used
AMXmachinery
CABEZAL PARA LIJAR
CABEZAL PULIDOR PARA MOLDURAS Y PARTES IRREGULARESCABEZAL PULIDOR STANDARD CON 32 CEPILLOS CORTOS DE 1-1/2" (13-1/4" DIA)OPCIONAL:CEPILLOS LARGOS DE 3-1/2" (17-1/4" DIA)LIJA GRANO 60, 80, 100 O MAS FINA4 TAMANOS A ESCOGER:MODELOANCHOFLECHA2GP-W-10011”¾ - 1-1/2”2GP-W-10022”¾ - 1-1/2”2GP-W-10044”¾ - 1-1/2”2GP-W-10066”¾ - 1-1/2”
AMXmachinery
CANTEADORAS USO RUDO INDUSTRIAL
PARTE # 1N-CTA-008 - CANTEADORA - 8" ANCHO - MOTOR 2 HPPARTE # 1N-CTA-010 - CANTEADORA - 10" ANCHO - MOTOR 3 HPPARTE # 1N-CTA-012 - CANTEADORA - 12" ANCHO - MOTOR 5 HPPARTE # 1N-CTA-014 - CANTEADORA - 14" ANCHO - MOTOR 5 HPPARTE # 1N-CTA-016 - CANTEADORA - 16" ANCHO - MOTOR 5 HPCANTEADORAS PARA USO PESADO INDUSTRIALCARACTERISTICASANCHO 8”ANCHO 10”ANCHO 12”ANCHO 14”ANCHO 16”LONGITUD DE LA MESA74”74”74”74”74"CABEZAL4 CUCHILLAS 1/8" X 1"4 CUCHILLAS 1/8" X 1"4 CUCHILLAS 1/8" X ...
AMXmachinery
DEBARKER NICHOLSON 27"
PARTE # 11604 – DEBARKER - NICHOLSON 27" A5A RINGEN BUENAS CONDICIONES DE OPERACIONLEFT HANDAIR SEAL