ID: 2284
Open
Description
PARTE: 12527 - ENCHAPADORA DE CANTOS - BIESSE AKRON 1435A
USADA – MUY BUENAS CONDICIONES
Year: 2018
CAPABILITIES
-One-sided edgebander with glue pot
-CNC control and command system with TS10 digital controller, large ``touch screenLCD graphic display, WINDOWS CE operating system, USB port
-Chain drive and upper presser
-Group of pressure rollers
Workstation :
-Premilling
-Gluing unit with pellet pot
-Adjustable pneumatic pressure unit
-End cutting unit 2 tilting saws 0-15˚ for bevel cutting, motor 0.50Kw
-Fine trimming top and bottom trimming unit, 0.65Kw motor
-Radius scraper unit for 3mm pvc finishing
-Polishing brush unit, 0.37Kw motor
Specifications:
-Minimum & maximum thickness of the part: 10 to 60mm
-Minimum width of the part: 85mm
-Minimum piece length: 140mm
-Tape thickness in roll: 0.4 to 3mm
-Thickness of the pre-cut wooden strip: up to 8mm x 45mm high
-Variable feed speed: up to 12m/min
-Edgebander length 16` and 6 inches
-Automatic start of the groups and motors foreseen in the program.
-2nd pass direct selection key.
-Management of 8 digital axes
-Lists of programs with manual and/or automatic launch.
-Diagnosis of errors with codes and comments.
-Statistical production data.
-This device is mounted on an adjustable suspended control panel
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12546 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISION
PARTE: 12546 - TRITURADOR - ASTILLADOR MADERA - 58” - PRECISIONUSADO - BUENAS CONDICIONESYear
2018Precision
58" Chip Pac6-Knives72"
CycloneH-Type
blower with dual load out chutes6'x6'
Screen
25'
Vibrating Infeed with transition chute to chipper with fiberglass section and
MDI metal detector
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALESNUEVA CON GARANTIACARACTERISTICAS220V/60HZ/3PH1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HPFeeding motor: 3Kw – 4 HP Stepless variable fe...
AMXmachinery
APILADOR SEMI-ELECTRICO – ELEVACION 3 METROS - CAPACIDAD 1,000 KG
PARTE: 1CM-HSEW1000 - APILADOR
SEMI-ELECTRICO – ELEVACION 3 METROS - CAPACIDAD 1,000 KG
NUEVO CON GARANTIA
Altura de Elevación: 3000 mm (3.0 m)
Ancho de horquillas: Ajustable
Capacidad: 1000 Kg (1 Ton).
Levantamiento eléctrico, empuje manual.
La carga de 1 tonelada es a piso, Conforme la altura
decrece la capacidad de carga.
Largo de las unas: 90 cm
Ancho de las patas al exterior: 1132 mm a 1532 mmAncho de las patas al interior: 900 mm a 1300 mmEntra una tarima de...
AMXmachinery
PARTE: 12663 - COLECTOR DE ASERRIN - MOTOR 10 HP - NEDERMAN
PARTE: 12663 - COLECTOR DE ASERRIN - MOTOR 10 HP - NEDERMAN
Usado - Muy Buenas Condiciones
Modelo: NFP-S1000
Tested and works
as it should.
Does not include
the catch / waste bags
Total filtration
area 360 ft2
See attached PDF
for all specs
Year 2018
230/460V 3PH