Identificador: 2384
Abierta
PARTE: 12552 - COMPRESOR DE TORNILLO - 30 HP – INGERSOLL RAND - 460V
AMXmachinery
Descripción
PARTE: 12552 - COMPRESOR DE TORNILLO - 30 HP – INGERSOLL RAND - 460V
USADO - MUY BIENAS CONDICIONES
Ingersoll Rand UP6S-30-125
Used / Like New Ingersoll Rand
Model UP6S-30-125
30 HP
203 PSIG • 125 cfm • 460 Volt • Hours: 1964
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12674 - REASERRADORA - 1 SIERRA - BAKER
PARTE:
12674 - REASERRADORA - 1 SIERRA - BAKER
Usada - Buenas condiciones
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROS
PARTE:
2PG-TNF823 – HORNO PARA CERAMICA, VIDRIO, METALES – 93 LITROSNUEVO CON GARANTIAThe digital automatic TnF-82 kiln is large enough for most ceramic projects. Figured at cost per cubic foot, it is among our lowest priced hobby kilns. It uses the same circuit size as most of our studio kilns. Upgrade to a larger kiln later without having to install a new circuit.Features the easy-access drop down switch box. Remove two screws, and the box, hinged at the bottom, opens forward for easy mai...
AMXmachinery
PRENSA DE TABLEROS - 6 SECCIONES
PARTE: 2CK-SA-CCFP-08.5-06 - PEGADORA DE 6 SECCIONES DE 8.5 PIES ANCHO STANDARDNUEVA CON GARANTIACARACTERISTICAS:- MATERIAL HASTA 3" ANCHO X 8.5 PIES DE LARGO- ALTO DE LA GARRAS 2-1/2" - ABERTURA DE LOS BRAZOS 38"- PRODUCCION MAQUINA 6 SECCIONES: 144 PANELES POR TURNO- PRODUCCION MAQUINA 14 SECCIONES: 300 PALES POR TURNO- PRODUCCION MAQUINA 20 SECCIONES: 500 PANELES POR TURNO- PRODUCCION CONSIDERANDO COMO EJEMPLO 3 PANELES POR SECCION X 8 HRS- BRAZOS DE ALTA CALIDAD - RESISTENTES A LA CORROSION...
AMXmachinery
REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
PARTE:
2FA-RM6X6 - REASERRADORA HORIZONTAL – 1 BANDA – ANCHO 6” - 15 HP - REGRESADORA
NUEVA CON GARANTIA
Very similar to our 6 x 8
This automatic machine is
equipped with a powered hold-down and an innovative powered belt return, which
is self adjusting and offers operators the ability to fine-tune the return belt
height and angle to fit your specific mix of products.
When setting the sawblade to
the desired board thickness, the feed belt conveyor and the return belt are ...