ID: 2449
Open
Description
PARTE: 12569 - SELLADORA CON TUNEL DE CALOR - TRUELINE
Usado - Buenas condiciones
Marca: Truline Packaging
MPN: PP1519ECMCU
20” X 16” X 6”
Mfg: USA
110V, 1 PH
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12576 - SIERRA ESCUADRADORA VERTICAL – HOLZHER 1265 SUPER CUT
PARTE: 12576 - SIERRA ESCUADRADORA VERTICAL – HOLZHER 1265
SUPER CUT
USADA – BUENAS CONDICIONES
Capacity: 75″ x 169″
Depth
of Cut: 2″
Max.
Blade Size: 8-5/8″(220mm)
Main
motor 4 HP 230 volts three phase
Depth
of cut 2” max
Scoring
unit with insert knives
Saw
head rotates 90 degrees for rip or cross cutting
Automatic
shifting back grid
Two
gauging bars with flip stop for midway fence
Bottom
rollers with manual control for easy movement of l...
AMXmachinery
PARTE: 12195 – AFILADORA DE CUCHILLAS – WEINIG RONDAMAT R931
PARTE: 12195 – AFILADORA DE CUCHILLAS – WEINIG
RONDAMAT R931
USADA – BUENAS CONDICIONES
Fotos y Características:
Motor 460V, 3 fases
Mfg 1998
-500x500.png)
AMXmachinery
PARTE: 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURAS
PARTE: 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURASNueva con garantíaFeatures:PLC control for easy operator and variability setup.Fast spraying processing for profiles strips and two edges together or four edges at panels by one pass.The spray guns are controlled by photocell sensor for auto spray time and saving the spray material.Individual painting volume adjustment control for each spray gun.Variable feed speed control for the best finish result.Two trays to collect unused pai...
AMXmachinery
PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260
PARTE: 12420 – SIERRA OPTIMIZADORA
– DIMTER WEINIG OPTICUT 260
USADA – MUY BUENAS CONDICIONESYear
of Manufacture: 2018Condition:
ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT
CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working
dimensions:Cross
section min./max
0.48"- 10.23" width; .25" - 3.15" thickness. Min.
part length 5.5" cut. Length
min/max 15.75"- 16'0".Motor:
10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...