Identificador: 3296
Abierta
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2LO-PT-HF1210-30FT - PRENSA DE RADIO FRECUENCIA - 12" X 10" X 30FT
- Special design for mass production for engineer flooring, door stile, long panel, 2 to 3 minute to dry per cycle.
- Automatic infeed, outfeed cycle, mass production within 3 - 5 minutes is ready for output.
- Shortens manufacturing procedures – no need to pass through for the dovetailing or joining process.
- Equipped with a massive upper plate that supplies powerful hydraulic pressure which presses each part of wood board to make even the most crooked pieces of wood flat.
- Due to the flatness it has made, it may not need to pass through double side planer processing.
- This substantially reduces wood loss.
- User friendly operations; it is equipped with side automatic inlet and outlet feeding table system for continuous and mass production.
- Top quality wood board is manufactured by way of glue cured and completely hardened glue joins with high frequency heating in the meantime.
- All processing steps are integrated into the HMI interface control panel for easy one-touch control on the screen.
- Utilizes high frequency, glue cured evenly from inner of the glue line of the wood.
Specification:
| Model No. | PT-HF1210-30FT |
| In Put Power | 100 KVA |
| Out Put Power | 60 KW |
| Max. Working Width | 10" |
| Max. Working Heigth | 12" |
| Maximum Working Length | 30ft |
| Pressure | 140 kg/cm2 |
| Hydraulic Pump | 15 HP |
| Press Cylinder (top) | 8 Pcs |
| Press Cylinder (Rear) | 46 Pcs |
| Driving Conveyor | 3 Units |
| In & Out Feed Belts Conveyor | 30 ft Length each |
| Machine Weight | 8000 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 5HP
PARTE: 2CK-UFO103B - COLECTOR DE POLVOS - 5HP Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop. HP generating 2863 CFMBase is mounted on c...
-500x500.png)
AMXmachinery1
CABEZAL DE CORTE CORRUGADO HIDRAULICO TRASERO
PARTE: 3CH-HFBB - CABEZAL DE CORTE CORRUGADO HIDRAULICO TRASEROBore that can be fits in general 4-side high speed moulders/planers.Standard specifications with single angle 12 or 20 degrees.
-500x500.png)
AMXmachinery1
TALADRO LINEAL - 23 HUSILLOS
PARTE: 2RI-R19F - TALADRO LINEAL - 23 HUSILLOSDescription:Is the mid level model in the line boring drills that Ritter Machinery has to offer. Is both affordable and built to last. Is a multi-spindle drill used for adjustable shelving. No more using templates that wear out quickly and lose accuracy. Is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with indexing pins on both the left and right hand side of the machine. The rear fenc...
-500x500.png)
AMXmachinery1
ALIMENTADOR - VELOCIDAD VARIABLE
PARTE: 2CK-DC30 - ALIMENTADOR - VELOCIDAD VARIABLE Is a safe and powerful feeding unit for shapers, table saws, and more. The rubber feed wheels grip the workpiece firmly and feed it at a constant speed to produce flawlessly finished pieces. The DC brushless servo motor with electronic variable speed adjustment allows the operator full control for setting the optimum feed speed according to the specific job. The universal stand allows for quick positional adjustment fro...