Identificador: 2985
Abierta
Descripción
PARTE: 12724-12 - PRENSA MEMBRANA - 4 X 8 PIES - SHAW ALMEX
USADO
4 X 8 PIES
HECHA EN CANADA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR AXIAL DE PARED - DE 6 ASPAS - 36” DIAMETRO - AMERICAN COOLAIR
PARTE: AMX-10090 - EXTRACTOR AXIAL DE PARED - DE 6
ASPAS - 36” DIAMETRO - AMERICAN COOLAIRUSADO - EXCELENTES CONDICIONES - COMO NUEVOPOLEA Y BANDAVENTILADOR
MOTOR CERRADO DE 1 HP, 220/440V, 3
FASES, 1,750 RPMMEDIDAS TOTALES: 16" ANCHO X 44" LARGO X 44" ALTO
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
BASTONERA – MOTOR 15 HP – CAPACIDAD ¼” - 2-1/4” DIAMETRO – JENKINS R
PARTE: 12467 – BASTONERA – MOTOR 15 HP –
CAPACIDAD ¼” - 2-1/4” DIAMETRO – JENKINS R
USADA – BUENAS CONDICIONES
4 KNIFE ADJUSTABLE CUTTERHEAD
15 HP MAIN MOTOR - 3600 RPM
TOP
AND BOTTOM IN AND OUTFEED ROLLERS
FEED
SPEEDS 60-90-100-120 FPM, BOTH FORWARD AND REVERSE, 2 HP FEED MOTOR
MACHINE
INCLUDES (4) KNIFE HEAD WHICH IS ADJUSTABLE UP TO 1-1/2” DIAMETER
AMXmachinery
SIERRA RADIAL - JUNIOR 640CE - DISCO 15.75” - 4 HP - LARGO 21.5”
PARTE: 2JG-640CE -
SIERRA RADIAL - JUNIOR 640CE - DISCO 15.75” - 4 HP - LARGO 21.5”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP for 3-Phase Option, 3 HP for Single
Phase Option, 2800 RPM motor400 mm (15.75") Blade diameter (not
included)62.20" x 38.39" Table size21.5" Max crosscut length on 3/4"
thick material0 to 33.8" Rip capacity4.9" Max depth of cut15" Max cut length at 45 deg....