Identificador: 1074
Abierta
Descripción
PARTE: 12105 – SIERRA INGLETEADORA – DOBLE – CTD
Usada – Buenas condiciones
230/460V, 60 Cy, 3 Phase
Motor: 3 HP, 3450 RPM
.09 Cubic Meters At 5.2 KG/ CM Squared Based on 10 Strokes per Minute
Saw Heads Swivel From 90 Degrees-45 Degrees Toward Each-Other with Degree Markings and Stops at 90 Degrees-45 Degrees
8' Centers, Traveling Right Hand Carriage On Rack and Pinion
Saw Arms-Pivot Brackets are Cast Iron
10" Blade-2" (51MM) x 4-7/8" (124MM)
12" Blade-2.5" (64MM) x 5-3/8 (136 MM)
Weight: 2000 LBS
Dimensions: 141" L x 33" W x 67" H
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CASETA PINTURA CONTINUA PARA MOLDURAS
PART # 2TA-TS-12ATSP – CASETA DE PINTURA CONTINUA PARA MOLDURASNueva con garantíaFeatures:PLC control for easy operator and variability setup.Fast spraying processing for profiles strips and two edges together or four edges at panels by one pass.The spray guns are controlled by photocell sensor for auto spray time and saving the spray material.Individual painting volume adjustment control for each spray gun.Variable feed speed control for the best finish result.Two trays to collect unused pai...
AMXmachinery
MANGUERAS PARA COLECTORES DE ASERRIN
MANGUERAS PARA COLECTORES DE ASERRINNuevas con
garantíaCOLOR CRISTAL EN PVCPARTE: 1SIL-DC-DUCT2
- MANGUERA 2" DIAMETRO - 10 MTSPARTE: 1SIL-DC-DUCT3
- MANGUERA 3" DIAMETRO - 10 MTSPARTE: 1SIL-DC-DUCT4
- MANGUERA 4" DIAMETRO - 10 MTSPARTE: 1SIL-DC-DUCT5
- MANGUERA 5" DIAMETRO - 10 MTSPARTE: 1SIL-DC-DUCT6
- MANGUERA 6" DIAMETRO - 10 MTS
AMXmachinery
PARTE: AMX-10126 - EXTRACTOR DE TUBO - ASPAS 15” DIAMETRO - S&P - MOTOR ½ HP
PARTE: AMX-10126 - EXTRACTOR DE TUBO - ASPAS 15”
DIAMETRO - S&P - MOTOR ½ HP
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 220/440V, 3 FASES
MEDIDAS: 15” DIAMETRO INTERIOR X
19” DIAMETRO EXTERIOR X 12” FONDO
5,500.00 MXN
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)