Identificador: 3283
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2CC-14MRH - SIERRA TRONZADORA - REACONDICIONADA
Precision Products 14" Mechanical Right Hand Cut Off Saw
S/N: 1794
Completely Refurbished (4-2025)
5 HP TEFC currently wired for 460V 3 Phase
Magnetic starter with 110 control voltage
Standard cycle speed of 133 cycles/minute
2"x 8" cutting capacity
14" sawblade not included
FOB - Manawa, WI
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA RAJADORA - 1 DISCO - 12"
PARTE: 2EX- XR-12LE - SIERRA RAJADORA - 1 DISCO - 12"Specifications:Horsepower: 7.5HP or 15HPVoltage: 230V or 460VPhase(s): 1PH or 3PHBlade Size: 12"Main Motor: 15 HPFeed Motor: 1-1/2 HPBlade Speed: 4500Feed Speed: 50 - 100Max Rip Capacity: 14-3/4"Working Height: 32"Table Size: 37" x 51-1/4"Hold Down Rollers: 6Chain Rail Length: 40"Chain Pad Width: 6"Guaranteed Glue Line Length: 8'Set of Anti-Kickback Fingers: 3Disc Brakes: YesOiler System: Auto w/ shutoffAMPS (230V/460V): 42A / 21AMax Thicknes...
AMXmachinery1
BOLSA DE REPUESTO - PLASTICO
PARTE: 2EX-DC-BAGS - BOLSA DE REPUESTO - PLASTICOOffers top quality dust collection bags in a variety of sizes for multiple dust collection models used for disposing of dust properly. These 6mm-thick plastic dust collection bags are to be used with a ring diameter of 23.5 to 26 inches
AMXmachinery1
TROMPO AUTOMATICO - CON SISTEMA DE ALIMENTACION
PARTE: 2CK-DT-1128A
Range of cutter diameter
1” to 6” (changeable)
Table diameter
18”
Table speed
1.5 ~ 4.0 RPM (4 speeds)
Spindle diameter
30 mm
Spindle speed
9000 RPM
Cutter size
100 mm
Spindle height
4”
Follower roller diameter
100 mm x 1
Table drive moto...
AMXmachinery1
CEPILLO 1 CARA - 20 PULGADAS
PARTE: 2CK-P20HVHas a cast iron table and head assembly with robust welded steel frame results in superior planing finish due to greatly reduced vibration. The spiral insert knife cutterhead runs extremely quiet and the solid carbide inserts provide a smooth finish and have a long life. When one edge gets dull simply rotate the knife 90 degrees for a new cutting edge. Knives can be rotated four times before needing to be replaced.Spiral Insert Knife Cutterhead with replaceable carbide inse...