Identificador: 2571
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 20'' x 40'' PARTE: 2GM-GML-2060
Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HP
- ISO 9001 certified
- 1-Year Parts Only Warranty
- Large spindle bore 3-1/8”
- Spindle D1-8
- Guideway width 12”
- Main motor 10HP
- 16 spindle speeds from 25-1,800 rpm, 12 speeds
- 4-way rapid traverse on the carriage longitudinal and cross
- 60 kinds of inch threads, and 41 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 20" |
| Max. length of workpiece | 60" |
| Max. swing over cross slide | 12 1/2" |
| Max. Swing in gap | 29-1/8" |
| Width of Bed | 12" |
| Effective length in gap to spindle | 6" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 3 1/8" | D1-8 |
| Taper of spindle center | MT7 |
| Spindle speeds | 25-1,800 rpm / 12 steps |
| Longitudinal feeds | 0.0011-0.063 IPR, 42 kinds |
| Cross feeds | 0.0003-0.018 IPR, 42 kinds |
| Inch threads | 2-112 TPI, 60 kinds |
| Metric threads |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
COLECTOR DE ASERRIN - 5 HP
PARTE: 2CK-UFO103BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.5 HP generating 2863 CFMBase is mounted on casters so it can be moved around...
-500x500.jpg)
AMXmachinery1
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNA
PARTE: 3AM-G-40/70S - SIERRA CINTA PARA METAL - DOBLE COLUMNASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualBlade Speed(m/min): 27.45.80Vice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMax. Cutting Capacity(mm): Round:300mm, sqaur...
-500x500.png)
AMXmachinery1
CABEZAL DE CORTE ESPIRAL HIDRAULICO DE ALTA RESISTENCIA
PARTE: 3CH-HHPB - CABEZAL DE CORTE ESPIRAL HIDRAULICO DE ALTA RESISTENCIAHydraulic bore that can be fits in 4-side high speed moulders/planers.Choice of TCT knife bit size 30*12*1.5mm
-500x500.png)
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES ANGULARES
PARTE: 4ST-CT600 MX - SIERRA OPTIMIZADORA - CORTES ANGULARESCROSSCUT SAW WITH AUTOMATIC PUSH-FEED FOR ANGLED CUTOPTIMISED CUTTINGIs a crosscut saw with automatic push-feed with complete optimisation and defection of the boards.Thanks to its rotating table, it is the optimal solution for all straight (90°) and angular (+/- 70°) cutting for bothsingle board and stack sawing.The new push-feed profile slides on a linear guideway and ball bearings. Rack and pinion feed system and brushless motor t...