ID: 2571
Open
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Description
TORNO 20'' x 40'' PARTE: 2GM-GML-2060
Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HP
- ISO 9001 certified
- 1-Year Parts Only Warranty
- Large spindle bore 3-1/8”
- Spindle D1-8
- Guideway width 12”
- Main motor 10HP
- 16 spindle speeds from 25-1,800 rpm, 12 speeds
- 4-way rapid traverse on the carriage longitudinal and cross
- 60 kinds of inch threads, and 41 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 20" |
| Max. length of workpiece | 60" |
| Max. swing over cross slide | 12 1/2" |
| Max. Swing in gap | 29-1/8" |
| Width of Bed | 12" |
| Effective length in gap to spindle | 6" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 3 1/8" | D1-8 |
| Taper of spindle center | MT7 |
| Spindle speeds | 25-1,800 rpm / 12 steps |
| Longitudinal feeds | 0.0011-0.063 IPR, 42 kinds |
| Cross feeds | 0.0003-0.018 IPR, 42 kinds |
| Inch threads | 2-112 TPI, 60 kinds |
| Metric threads |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachinery1
PARTE: 2CK-ECT SERIES - DOUBLE END TENONER - 8 CABEZAS - 141” ANCHO
PARTE: 2CK-ECT SERIES - DOUBLE
END TENONER - 8 CABEZAS - 141” ANCHOThey are available with up to (8) spindles (4-per side) and come in widths from 51” to 141”. These double end tenoners are ideal for door, furniture, & window production and more. The ECT series can be customized for your specific needs with a wide range of processing units and features. The ECT are available as a stand-alone solution or can be purchased in a line for processing all four sides of a workpiece auto...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS - AIRE CALIENTE
PARTE: 2SS-EZ 60HA - ENCHAPADORA DE CANTOS - AIRE CALIENTEOur hot air edgebander applies your preferred choice of preglued edgebanding. Reduce the amount of panels discarded due to unsatisfactory edge banding installation. It features electronic variable speed control, digital temperature control, electromagnetic end cutters, an accutrim edge trim system and more. The innovative design of this American-Made machine makes it easy to use and provides a very dependable edgebanding solution. This ma...
AMXmachinery1
SIERRA TRONZADORA - 24 PULGADAS
PARTE: 2CK-PCS24Is the ideal solution for increasing production on crosscut operations while maintaining optimum safety. Its powerful 15HP motor and adjustable cutting stroke ensure it can effortlessly cut though a wide range of materials and dimensions. A number of features are included to ensure safe operation such as the infeed/outfeed safety guard, microswitches on all access doors, and a security bolt on the saw access door. Available in either left-hand or right-hand operation depending on...
-500x500.png)
AMXmachinery1
2GM-PRB - DOBLADORA DE TUBO HIDRAULICA 3''
PARTE: 2GM-PRB - DOBLADORA DE TUBO HIDRAULICA 3''Fully equipped with a 3" die set to roll metal square tube into rings. Perfect solution for any fabrication shop looking to speed up the manual process. These metal roller benders are popular amongst the metal fence manufacturing, green house manufacturing, roll cage fab shops, and welding fab shops. ISO 9001 certifiedHydraulic top roller positioning with digital readoutMax capacity: 4” tube and 3-1/2” pipeHeavy Duty 5-1/2HP AC main motorHeav...