Identificador: 2571
Abierta
ID de articulo : # 2571 se ha agregado a su lista de deseos.
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2GM-GML-2060 - TORNO 20'' x 40''
Bed Gap Metal Lathe # GML-2060, 20” x 60”, 3-1/8” bore, 10HP
- ISO 9001 certified
- 1-Year Parts Only Warranty
- Large spindle bore 3-1/8”
- Spindle D1-8
- Guideway width 12”
- Main motor 10HP
- 16 spindle speeds from 25-1,800 rpm, 12 speeds
- 4-way rapid traverse on the carriage longitudinal and cross
- 60 kinds of inch threads, and 41 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
| Max. swing over bed | 20" |
| Max. length of workpiece | 60" |
| Max. swing over cross slide | 12 1/2" |
| Max. Swing in gap | 29-1/8" |
| Width of Bed | 12" |
| Effective length in gap to spindle | 6" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 3 1/8" | D1-8 |
| Taper of spindle center | MT7 |
| Spindle speeds | 25-1,800 rpm / 12 steps |
| Longitudinal feeds | 0.0011-0.063 IPR, 42 kinds |
| Cross feeds | 0.0003-0.018 IPR, 42 kinds |
| Inch threads | 2-112 TPI, 60 kinds |
| Me |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...
-500x500.png)
AMXmachinery1
LIJADORA DE MOLDURAS
PARTE: 2LA-150 - LIJADORA DE MOLDURASThis basic machine fills the need for a lower cost profile sander to sand raised panels, door edges and work pieces that do not require a tilting arbor. It features an inverter controlled 3 phase motor, variable speed, and vertical adjustment.lower cost profile sander
AMXmachinery1
COLECTOR DE POLVOS - 10 HP - CICLON
PARTE: 2EX- DCY-1000 - COLECTOR DE POLVOS - 10 HP - CICLONComes in a single phase model to power 27 amps at 220 volts. Magnetic starter included. See comparison chart below for specifications.
-500x500.png)
AMXmachinery1
SIERRA VERTICAL - 74" ALTO X 120" ANCHO
PARTE: 2SS-6800 - SIERRA VERTICAL - 74" ALTO X 120" ANCHOFeaturing a heavy duty worm drive motor, additional steel frame supports, aluminum wheels and double bearings, this machine will deliver an accuracy of 1/64″. Can cut sheets up to 74″ without blinking an eye.Standard Equipment3 Hp worm driven heavy-duty saw motor.10 ft. welded steel frame.Chrome-plated 1 3/4″ guide tubes.8 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to horizont...