Identificador: 1820
Abierta
ID de articulo : # 1820 se ha agregado a su lista de deseos.
Descripción
PARTE: 2LO-TRS-150F - SIERRA MULTIPLE DE VAIVEN
FEATURES
- Minimum kerf multi blade frame saw designed to maximize production and minimize material loss.
- Thin frame saw design accepts different saw frames & blade combinations.
- Unique design allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass.
- Machine supplied with PLC controller to allow operator to maximize saw production & minimize down time.
- Production times are reduced because of the machine's durability to consistently produce.
- Saw is engineered and designed to make extremely accurate cuts, cutting products with very tight tolerances up to 0.004” and eliminating the sanding before proceeding to the next step in production.
- All controls are centrally located to permit operator to easily adjust & maintain the machine.
- Material waste reductions of up to 20% are achievable by use of the thin kerf blades (0.043” ~ 0.055”).
- The rigid saw blades frame is available in different configurations.
- A special air blast system that cools the blade for longer service intervals & removes saw dust from the gullet of the blade for reduced temperature and increases blade life.
|
SPECIFICATIONS |
TRS-80F |
TRS-150F |
|
Working Width |
0.79" ~ 7.874" |
0.75" ~ 6" |
|
Working Height |
0.79" ~ 3.15" |
1.25" ~ 10" |
|
Finish Material Thickness |
> 0.118" |
> 0.094" |
|
Thickness of Saw Blade |
0.047" ~ 0.065" |
0.043" ~ 0.055" |
|
Max. No of Saw Blade |
16 PCS (0.11" Material) |
22 PCS |
|
Saw Blade Cutting Cycle |
400/Min |
450/Min |
|
Stroke |
6.3" |
8.25" |
|
Saw Blade Size |
1.575" W x 19.685" L |
1.575" W x 19.685" L |
|
Main Motor |
20 HP |
20 HP |
|
Feed Motor |
1, 1.5, 2.5 HP |
1 HP |
|
Feed Speed |
12, 19, 37 IN/Min |
1 ~ 5 FPM |
|
Air Pressure |
90 PSI |
90 PSI |
|
Lubrication System |
Auto Oil Lubrication |
Auto Oil Lubrication |
|
Cooling System |
Water & Air |
Water & Air |
|
Machine Size |
65" x 53" x 71" |
142" x 32" x 75" |
|
G.W. |
5500 LBS |
5800 LBS |
|
N.W. |
5060 LBS |
5070 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
FINGER JOINT - AUTOMATICO
PARTE: 2CK-FL12 - FINGER JOINT - AUTOMATICO Represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted fo...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA Y FRENO 6 PIES
PARTE: 2GM-HBB-0610 - CORTADORA DE METAL HIDRAULICA Y FRENO 6 PIES Our 6 FT Sheet Metal Hydraulic Box and Pan Brake is a heavy duty hydraulic box and pan brake; constructed of steel for maximum rigidity. Equipped with a robust and quiet German Rexroth hydraulic logic system to clamp your workpiece with ease. Our box and pan brakes are made for simple operation with a conveniently located control panel to place on either side of the hydraulic brake.Taiwan MachinesI...
AMXmachinery1
SIERRA ESCUADRADORA - 3200 MM
PARTE: 2CK-D405A - SIERRA ESCUADRADORA - 3200 MMIs the ideal sliding panel saw for high accuracy cutting of sheet materials to produce kitchen cabinetry, furniture, millwork operations, and more. This is our most industrial saw with manual setting rip fence. The 10’ sliding table is made from a precision aluminum extrusion and runs on precision linear guide rails. It has motorized rise/fall and tilt of the blades.Motorized blade height & tilt adjustment with a digital angle readoutPrecisi...
AMXmachinery1
SIERRA CINTA PARA METAL
PARTE: 3AM-G4028 - SIERRA CINTA PARA METALMax. Cutting Diameter ： Round: 280 mmPlate: 190*400 mmBlade Speed： 25.46.79 m/minBlade Size： 0.9*27*3505 mmMotor Output： 2.2 kwHydraulic Pressure： 0.37 kwCoolant Pump： 0.04 kwTable height： 600 mmMachine Size(L*W*H) ： 1800*800*1230 mmNet Weight： 800 kgVice clamping ： HydraulicBlade tensioning form ： MaunalFeeding cut adjust way ： Hydraulic steplessFeeding way ： ManualHydraulic cooling way ： Natural Wind coolingChip conveyor wa...