Identificador: 2847
Abierta
ID de articulo : # 2847 se ha agregado a su lista de deseos.
.PNG)
.PNG)
Descripción
PARTE: 2MK-CBC FLEX - ENCHAPADORA DE CANTOS MANUAL
Is perfect to apply edge banding tape to concave and convex curved pieces. Being super portable and weighing only 21 pounds, this machine is ideal for extensive jobs. It has a digital temperature control and adjustable feeder speed.
| Technical Information | |
|---|---|
| Glue | Granulated Hot-Melt |
| Glue Temperature | 130° to 180º C |
| Motor specs | 1 Phase 127 V 5.5 A 700 W |
| Tape thickness | 0.4 mm – 1 mm |
| Max. tape width | 0-35/64” to 1-57/64” |
| Feeder speed | 0 to 19 ft/min |
| Weight | 21 Lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA OPTIMIZADORA - AUTOMATICA
PARTE: 2CK-CFS100 - SIERRA OPTIMIZADORA - AUTOMATICAIs the perfect upgrade from your manual cutoff saw with 3 to 5 times higher production output. It is designed to scan for defects in your material which are indicated by a florescent crayon mark. The saw will cut on the crayon mark allowing for fast defect removal. Equipped with several cutting modes like fixed, sequential, defect cutting modes the operator can select the program most suited to their needs. The powerful 10HP motor and 1...
AMXmachinery1
TOPE LATERAL ELECTRONICO
PARTE: 4ST-STROMABSTOP - TOPE LATERAL ELECTRONICOELECTRONIC MEASURING POSITIONEROPTIMISING THE CUTTING PROCESSIs our simple and sophisticated solution for turning your manual machineinto a semi-automatic resource by integrating an electronic stop which allows you to optimise the cutting process.Modular in length and reversible in position.The flexibility of configuration allows it to be combined with the Stromab cut-off machineor to any cut-off machine already installed in the workshop, to reduc...
AMXmachinery1
SIERRA MULTIPLE DE VAIVEN
PARTE: 2LO-TRS-150F - SIERRA MULTIPLE DE VAIVENFEATURESMinimum kerf multi blade frame saw designed to maximize production and minimize material loss.Thin frame saw design accepts different saw frames & blade combinations.Unique design allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass.Machine supplied with PLC controller to allow operator to maximize saw production & minimize down time.Production times are reduced because of the machine's du...
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA ANCHA - 2 BANDAS - 52" ANCHO
PARTE: 2EX-XS-2P52 - LIJADORA DE BANDA ANCHA - 2 BANDAS - 52" ANCHO75″ Belt LengthOver thickness safety deviceInfeed bed rollersDigital thickness controllerIndividual amp metersDisc brakes on sanding headsTelemecaique electricsCamozzi pneumaticsVariable speed drive systemSpecifications:Horsepower: 30/30 HPVoltage: 230V or 460VPhase(s): 3PHBelt Size: 52" x 75"CFM Requirement: 4800Main Motor: 30 / 30 HPFeed Motor: 3 HPElevation Motor: 0.5 HPContact Drum Size: 8" / 5"Conveyor Speed (ft/min): 15 ...