Identificador: 2926
Abierta
ID de articulo : # 2926 se ha agregado a su lista de deseos.
.PNG)
Descripción
PARTE: 2PI-MMTJ - ESPIGADORA Y MORTAJADORA
Is a full 3 Axis CNC machining center used for producing high quality miter joints used in cabinet door manufacturing. This machine produces between 200-275 doors per 8-hour shift with one operator.
- Smaller Footprint: 30% Less Floor Space
- 25% More Powerful
- 40% More Clearance To Load Short Parts
- Efficient Maneuverability
- Front Access Control Panel
- Extra Safety Guarding
- Rear Machine Enclosure As A Standard
- Swivel Touchscreen
- Table Plates Swivel To 90 Degrees
- LED Lighting Inside The Machine
- Standard Pneumatic Cylinders
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ESPIGADORA HORIZONTAL
PARTE: 2PI-OTF - ESPIGADORA HORIZONTALIt is designed to belt position the workpiece, bore a hole, then advance the workpiece to the correct location for the inserter, inject glue or water (for pre glued dowels), and fire the dowel into the hole. A part is placed into the work zone referencing the back fence and advancing the part onto the belt. The belt system allows constant part feeding into the machine.Elimination of complicated machine setupQuick, accurate assemblyGain production times on C...
-500x500.png)
AMXmachinery1
MESA DE MONTAJE - MARCO FRONTAL
PARTE: 2RI-R215E/A - MESA DE MONTAJE - MARCO FRONTALDescription:Screwed together face frame construction provides for the most efficient and economical methods for joining frames. Flush and tight joint construction is provided for all types of wood. Elimination of dowel boring and insertion, clamping time and joint misalignment provide up 50% time reduction in frame production. The ability to disassemble and reposition a joint creates less loss of material in case of errors in the joint location...
-500x500.png)
AMXmachinery1
TORNO 26 X 80''
TORNO 26 X 80'' PARTE: 2GM-268026” x 80”, 4-1/8” bore, 10HPISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP4-Way Rapid Traverse16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by h...
-500x500.png)
AMXmachinery1
TORNO 14'' X 40''
TORNO 14'' X 40'' PARTE: 2GM-1440BGF-3ISO 9001 certifiedLifetime Tech Support by phone and videoFull Geared-head precision Metal Lathe with foot brakeQuick-change gearbox with fast and easy threading set up3 HP heavy duty main motor runs on 220V Single-Phase power1.5” Spindle boreSpindle Nose D1-4 CamlockHeavy Duty guideway; 7.5” width8 spindle speeds ranging from 70-2,000 RPM56 kinds of imperial threads44 kinds of metric threadsSpindle is balanced, ...