Identificador: 818
Abierta
ID de articulo : # 818 se ha agregado a su lista de deseos.
Descripción
PARTE # 10097
MARCA: C.R. ONSRUD
MODELO: 24210
MOTOR 10HP, 3 PH, 230V, 60 HZ
24” CAPACIDAD GARGANTA
BROCA VIAJA 0-3”
PEDAL NEUMATICO
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICO
PARTE: 2BA-PICO – ESPIGADORA MESA DOBLE - BALESTRINI PICOThe PICO machine cuts round dowels or round end tenons on chair and case goods components. PICO cuts horizontal or vertical tenons on three compound angles sim-ultaneously without the use of special fixtures. The PICO machine is equipped with the exclusive, patented Balestrini anti-splitting cycle. With this system, the tables are fixed and the tool always enters the wood with the grain (climb cutting) and eliminates any tear-out.The PIC...
AMXmachinery
CEPILLO 2 CARAS - CAPACIDAD ANCHO 24”
PARTE:
12329 - CEPILLO 2 CARAS - CAPACIDAD ANCHO 24” - NORTHFIELD
USADO - BUENAS CONDICIONES24" width cap. x 6"
thickness cap.Upper spring loaded staggered
hold down fingersTop/Bottom helical carbide
heads30HP; 3PH upper cutterhead
motorapprox 20HP; 3PH lower
cutterhead motor5HP; 3PH variable speed feed
motor with gear reducer1HP; 3PH platen elevation
motor56" central distance
between cutterheads4" solid steel power
driven lower feed rollsUpper sectional feed rollsFeed Speeds Adju...
AMXmachinery
CEPILLOS 1 CARA - CUCHILLAS PLANAS - USO RUDO INDUSTRIAL
PARTE: 5NE-CP1-016 - CEPILLO 1 CARA - CUCHILLAS PLANAS - 16" ANCHO - MOTOR 5 HPPARTE: 5NE-CP1-020 - CEPILLO 1 CARA - CUCHILLAS PLANAS - 20” ANCHO - MOTOR 7.5 HPPARTE: 5NE-CP1-024 - CEPILLO 1 CARA - CUCHILLAS PLANAS - 24” ANCHO - MOTOR 10 HPNUEVOS CON GARANTIACEPILLOS PARA USO PESADO INDUSTRIALCARACTERISTICASCEPILLO 14”CEPILLO 16”CEPILLO 20”CEPILLO 24”CAPACIDAD ANCHO14”16”20”24”CAPACIDAD ALTURA6”6”6”6”MOTOR PRINCIPAL5 HP5 HP7.5 HP10 HPMOTOR ALIMENTADOR1 HP1 HP2 HP2 H...
AMXmachinery
SIERRA OPTIMIZADORA
PARTE # 2OM-T2010NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONPARTE # 2OM-T2020NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONPARTE # 2OM-T2030NC - SIERRA OPTIMIZADORA - ALTA PRODUCCIONNUEVA CON GARANTIACaracteristicas:Last Generation automatic programmable cut-off saw for optimized cutting of wood stock and defect removal.Particularly suitable for medium production requirements.The maximum feed speed of 400 FPM makes of the T 2010 NC a compact, flexible and highly productive system.The set of 5 top pre...