Identificador: 98
Abierta
ID de articulo : # 98 se ha agregado a su lista de deseos.
Descripción
RESISTENCIAS DE REPUESTO EVANS MACHINERY
PARTE # 2EV-01087 - RESISTENCIAS PARA POSTFORMADORAS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW
PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL
BAND RESAW2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT
NEW WITH WARRANTYWith 2′ digital readout
control panelHydraulic blade tensionSaw wheel elevation is driven
by motorConveyor is driven by
hydraulic motor
Max. board/cant size
11.8″
(W) x 9.8″ (T)
(300 x 250mm)
Distance
from upper blade to conveyor table
.79″
– 6.7″
(20 – 170mm)
Distance
...
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32A-M410 - MOLDURADORA 4 CABEZALES - ANCHO 10" - 3 FASES PARTE # 32A-M410S - MOLDURADORA 4 CABEZALES - ANCHO 10" - 2 FASESPARTE # 32A-M412 - MOLDURADORA 4 CABEZALES - ANCHO 12" - 3 FASESNUEVAS CON GARANTIACARACTERISTICASM-410M-410SM-412ANCHO MAXIMO TRABAJO10”10”12”LARGO MINIMO MATERIAL10”10”10”VOLTAGE3 FASES2 FASES3 FASESMOTOR SUPERIOR4 HP3 HP7.5 HPMOTOR INFERIOR4 HP3 HP5 HPMOTOR LADOS (2)4 HP3 HP4 HPCABEZALES LATERALES 30 MM – ESTILO EUROPEOSISISICAP. CORTE CABEZAL SUPERI...
AMXmachinery
RESISTENCIA FILAMENTO POSTFORMADORA
PARTE: 2EV-0110.10.00 - FILAMENTO POSTOFORMADORA 0110 – PARTE 80Tamaño paquete 166” x 6” x 6”
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...