PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...

PARTE: 2KA-JTB-50 - DOBLADORA DE TUBO HIDRAULICA – CAPACIDAD 2”Nueva con garantíaFeaturesStandard dies: 1〞,1-1/4〞,1-1/2〞,1-7/8〞Wall thickness: 0.04〞-0.19〞Hydraulic power drive, PLC ControlBending workpieces such as low carbon round tubes, stainless round tubes, square tubes, and round steel bars to achieve desired shapes.The equipment features "one-touch" operation on a single workpiece and data-program controlled mass processing.Easy to operate, reasonable in composition, and l...

PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H

PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H

PARTE: 12595 - TRITURADORA - BLOAPCO - MODELO 3BUSADO – BUENAS CONDICIONESMOTOR ¾ HP, 230-460 V

PARTE: 12594 - TRITURADORA - BLOAPCO - MODELO 7-9USADO – BUENAS CONDICIONES – SIN USAR

PARTE: 12593 - TRITURADORA - BLOAPCO - MODELO 12SCCOMO NUEVO – SIN USAR

PARTE: 12592 - TRITURADORA – BALEMASTER - MODELO 1440 - 30 HP – 63”USADO - BUENAS CONDICIONESMotor Leeson 30 HP, 3/60/208-230/460 Volt, 1785 RPM

PARTE: 12591 - TRITURADORA - ASTILLADOR MADERA  - 100 HP – VERTICAL – VECOPLANUsado – Muy Buenas CondicionesModel: VAZ 1300 SHopper Opening: 52" x 50"Hopper Volume: 3.25 Cubic YardsRotor Diameter: 15"Number of Cutters: 37/60 (40x40)Rotor Speed: 120-145 RPMHP: 100Electrical: 460/3/60Manufactured: 2013

PARTE: 12590 – COMPACTADORA / EMBALADORA – PAPEL - CARTON – HORZONTAL – 20 HPUSADO EN BUENAS CONDICIONESModel 72 Automatic solves scrap handling problems efficiently and economically. For over the past 45 years, hundreds of Maren 72 Automatic Closed Door Manual Tie Balers have been installed across North America and beyond.The Maren 72 Automatic produces “Mill Size” bales generating maximum revenue for your recycled product and a quick return on investment.The Maren 72 automatic can ...

PARTE: 12589 – LINEA DE PINTURA – MOLDURAS – RENZO BORGONOVOUSADA - MUY BIENAS CONDICIONES - REVISADAModelo: SP 6PPara partes lineales como molduras, pisos, tiras de madera, etc.Can be used with water-based paints, thinners, nitro and polyurethane paints, paints containing pigments, acrylic paints, matt and gloss paints. The machine features 4 spray stations comprising each of up to 2 automatic spray-guns, a tray collection and a duct for direct product recovery. The machine is operated ...

PARTE: AMX-12491 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 9-3/4” - S & PUSADO - MUY BUENAS CONDICIONESMARCA: S&PMODELO: TTB-250MOTOR ETIQUETA: 1/8 HP, 127V, 60 HZ, 1625 RPM, 2.0 AMPMOTOR REAL:  1/2 HP, 110V, 1 FASE, 60 HZ, 1750 RPMVOL: 1350 M3/HHECHO EN MEXICO

PARTE: AMX-10170 – MOTOR ELECTRICO – 15 HP, 230/460 V, 3550 RPM – MARCA TECHTOPUSADO – MUY BUENAS CONDICIONES – COMO NUEVOBALEROS NUEVOS MARCA FAGPPROBADOCONECCION PARA BRIDAMARCA: TECHTOP15 HP230/460V3 FASES33.1/16.9 AMPRPM: 3550MEDIDAS: 23.5” LARGO X 12.25” ANCHO X 15.5” ALTOSE ENVIA EN PEQUENA TARIMA

PARTE: 12588 - LINEA DE PINTURA UV - RECIPROCANTE - GIARDINAUSADA - BUIENAS CONDICIONESCAPACIDAD PARA 12 PISTOLAS, 2 CIRCUITOSTUNEL DE AIRE, PUEDE USAR AGUA CALIENTE PARA CALENTAR EL AIRE,TUNEL INFRAROJOTUNEL UV 3D PARA SECAR CANTOSLOS HORNOS DE IR Y UV ESTAN NUEVOS, NO SE HAN USADO NI 1 HORA DESDE SU INSTALACIONLA LINEA ESTA FUNCIONANDO E INSTALADAVIDEO DE LA LINEA: https://vimeo.com/1045432546

PART: 3SH-SA22-E – PORTABLE SAWMILL – GASOLINE MOTOR 9 HP – DIAMETER CAPACITY 22”New with warrantySpecifications Engine: 9 HP gasoline Max log diameter: 22" Max board diameter: 20" Max cutting thickness: 4-1/2" Max cutting length：110" Blade speed:(Lenox): 3279FPM Shipping dimensions: 214 length x 64 width x 83 height – Weight 921 Lbs.Video: https://vimeo.com/1042508626

PARTE: 3SH-SA22 – ASERRADERO PORTATIL – MOTOR GASOLINA 9 HP – CAPACIDAD DIAMETRO 22”Nuevo con garantíaEspecificaciones Motor 9 HP de gasolina2 volantes de acero de 19” diámetroVelocidad de la sierra cinta: 3,279 FPM La cinta instalada mide: 370 cm largo x 1-1/4" de ancho Distancia máxima entre los 2 baleros cinta: 21.5”Diámetro máximo troceria: 22" Largo total aserradero con rieles: 3.90 metrosLargo total aserradero con rieles extra incluidos: 7.80 metrosDimensiones de la caj...

PARTE: 2EB-KSF-24303 - ARMADORA DE MARCOS – KSF - 24303Nueva con garantiaFrame/moulding width range: 6-150 mm (0.24"-5.9")Frame/moulding thickness range: 6-100 mm (0.24"-3.94")V-nail sizes: 7,10,12,15mmWeight:56kgPackage Dimension : 43.3" (L) x 21.6" (W) x 23.2" (H)Packing: wooden packingFeaturesAny hardness of wood can easily nail cornersNo power required, no air pressure required, This machine removes most of the electronic components, which also greatly reduces the damage rate of this machi...

PARTE: 12587 - ASERRADERO PORTATIL – 30 HP DIESEL - WOOD-MIZER – LT 35 TRAILERUSADO - MUY BIENAS CONDICIONESMOTOR 30 HP DIESELMFG: 2022

PARTE: 1AM-0010-1 - DESARMADORA DE TARIMAS - USO RUDO - INDUSTRIALNueva con garantía – 6 meses sobre defectos de fabricación en partes mecánicasMotor 10 HP, 220/440V, 3 fases, conectado a 220VOpcional Motor mas chico 5 HP, 220/440V, 3 fases, conectado a 220VEstación de paro y arranque con termomagneticoSierra cinta 228” largo x 1” ancho - de importación de la mejor calidadMedida mesa: 60” ancho x 48” fondo Medida máxima de tarima: 60” ancho x c...

PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHONuevo con garantíaFeatures:Powered pneumatic upper & lower pressure rollers for through feeding and precise cutting.Precision ground cast iron table for durability.Rigidly mounted alloy steel spindle provides accurate vibration-free power transfer.Heavy-duty sheet metal frame.Heavy-duty alloy spindle for durability & run out free performance.Spindle height adjustment by precision rack & pinion gears.Magnetic overload switch fo...