PART: 12308 - ALPINE AUGSBURG MILL - 100 HP USED - GOOD CONDITIONS NO MOTORS INCLUDED, ONLY THE MILLSVideo1: https://vimeo.com/774527761

PARTE: 12315 - EXTRACTOR DE ASERRIN - 75 HP - DONALDSON USADO - MUY BUENAS CONDICIONES 22,000 CFM @ 7:1 Air-To-Cloth Ratio 3,029 Sq. Ft. of Media from (189) Bag Pulse Jet Filter Cleaning from Shop Air (2) AMM Modules Clean Air Plenum with Top-Bag Removal Service Railing with Kickplate Trough Hopper, Screw Auger To Rotary Airlock Discharge 75 HP Blower Complete with Starter and Cleaning Controls

PARTE: 12315 - PRENSA DE TABLEROS - 20 SECCIONES TAYLORUSADA – MUY BUENAS CONDICIONES SEMIAUTOMATICA 20 section 8.5 ft wide Pneumatic 120 Clamps Swing-Style Semi-Automatic Front-End 32" Long Clamps 8.5` Wide Machine Pneumatic Rotation with Foot-Pedal Controls

PARTE: 12314 - EXTRACTOR DE ASERRIN - 30 HP USADO - MUY BUENAS CONDICIONES 440V MURPHY RODGERS COLECTOR DE ASERIN AIRLOCK EXTRACTOR DE TRANSFERENCIA

PARTE: 12313 - EXTRACTOR DE ASERRIN - 60 HP USADO - MUY BUENAS CONDICIONES EXTRACTOR DE TRANSFERENCIA ESTACION DE CARGA DE CAMION

PARTE:12312 - MOLDURADORA - 6 CABEZALES - WENIG HYDROMAT 22 AL USADA - BUENAS CONDICIONES Mfg. 1997 Eleltronic drive, Hydro jointers, 1 manual jointer. 1&13/16" spindles.

PARTE: 12311 - SIERRA ESCUADRADORA VERTICAL - HOLZHER 1265 USADA - MUY BUENAS CONDICIONESSupercut with scoring; 75" X 169" capacity; 4 HP main motor; 1-7/8" maximum depth of cut; 220 mm diameter saw blade; saw head rotates 90° for rip and crosscutting; manual moving back grid via hand lever; (2) length stops; optional lower stop rail; hinged mid support rail; bottom rollers for easy movement of large panels; self-contained dust collection

PARTE: 12310 - SIERRA ESCUADRADORA VERTICAL - ELCON USADA - MUY BUENAS CONDICIONES YMFG: 2005 Voltage: 230V 60Hz 3Ph 7-1/2 HP 4,200 RPM motor; 163" horizontal cutting capacity; 72" vertical cutting capacity; 12" blade capacity; SIKO digital readout with 2 meters (78.75") magnetic band installed for horizontal positioning of the saw head; rigid welded box steel frame with (4) vertical cutting positions; round upper guide rail with concave bearings for smooth operation; equipped...

PARTE: 12309 - TRITURADORA DE MINERAL - MOLINO ALPINE AUGSBURG USADA - BUENAS CONDICIONES MOTOR PRINCIPAL: 20 HP MOTOR SECUNDARIO: 20 HPVideo Maquina: https://vimeo.com/672495902 Video con Motores: https://vimeo.com/1103528276

PARTE: 12307 - MOLINO PULVERIZADOR - PULVEX 300 USADA - BUENAS CONDICIONES MOTOR ACTUAL 12.5 HP, 220V, 2 FASES SE PUEDE COTIZAR MOTOR 10 A 15 HP 220/440V, 3 FASES

PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia 13-gal. coolant tank w/ 1.2 HP pump

PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960USADA – MUY BUENAS CONDICIONES9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia 13-gal. coolant t...

PART: 2TA-TG-9330-E - PROFILE KNIFE GRINDER NEW WITH WARRANTYFEATURES: Economical model for small shop. Work table back to front, left to right is moved on linear bearing cross roller rail sets, accuracy and durability. Grinding wheel head is micro adjustable and accurate. 2 HP variable speed control motor for powerful grinding. Easy setup template holder for accurate copy tracer. Knife-edge angle is adjusted by dovetails are grooved; grinding center is never c...

PARTE: 2TA-TG-9330 - AFILADORA DE CUCHILLAS PARA MOLDURADORA NUEVA CON GARANTIAFEATURES: Economical model for small shop. Work table back to front, left to right is moved on linear bearing cross roller rail sets, accuracy and durability. Grinding wheel head is micro adjustable and accurate. 2 HP variable speed control motor for powerful grinding. Easy setup template holder for accurate copy tracer. Knife-edge angle is adjusted by dovetails are grooved; grindin...

PART: 12305-E - MOULDER CUTTER HEADS - LENGHTS 2.25”, 3”, 4”, 5”, 6” - BORE 1-13/16” - BORE 2-1/8"WITHOUT BUSHING - BORE 2-1/8" USED - VERY GOOD CONDITIONS North American Gladu hydro-lock 6 wing 20 degrees Interior diameter (bore): 1-13/16” External diameter: 6” (150 mm) Lenght 2-1/4” (57 mm) Lenght 3” (75 mm) Lenght 4” (102 mm) Lenght 5” (130 mm) Lenght 6” (152 mm) 

PARTE: 12304 - SIERRA ESCUADRADORA - 2500 MM – MOTOR 5 HP USADA - MUY BUENAS CONDICIONES Solo se uso para hacer 1 a 2 closets Modelo DC-SE2500 SILVERLINE MOTOR 5 HP, 230V, 60 HZ

PARTE: AMX-10048 - EXTRACTOR DE TURBINA - MOTOR 1 HP - S&P USADO - MUY BUENAS CONDICIONES MARCA S&P MODEL: CSB-1300 MOTOR 1 HP, 127/220V, 1 FASE, 60 HZ AMPS: 17.3 / 9.5 3535 RPM VOL. 1300 M3/H HECHO EN MEXICO ENTRADA: 5-1/2” DIAMETRO SALIDA RECTANGULAR: 5” ALTO X 4” ANCHO MEDIDAS TOTALES: 46 CM ANCHO X 38 CM FONDO X 57 CM ALTO

PART: 2CK-HR66-E - DUAL BAND TWIN BAND HORIZONTAL BAND RESAW2 MOTORS 20 HP - 11.8” WIDE X 9.8” HEIGHT NEW WITH WARRANTYWith 2′ digital readout control panelHydraulic blade tensionSaw wheel elevation is driven by motorConveyor is driven by hydraulic motor Max. board/cant size 11.8″ (W) x 9.8″ (T) (300 x 250mm) Distance from upper blade to conveyor table .79″ – 6.7″ (20 – 170mm) Distance ...

PARTE: 12303-E - GLUER - 2 SIDED - 63" WIDE - 4 ROLLER - BLACK BROTHERS USED - GOOD CONDITION230/460V, 3 PHASE - WIRED 230V CURRENTLY

PARTE: 12303 - ENGOMADORA 2 LADOS 63” - 4 RODILLOS - BLACK BROTHERS USADA - BUENAS CONDICIONES230/460V, 3 PHASE - CONECTADA A 230V ACTUALMENTE