PARTE: 12424 - GUILLOTINA TESTERA USADA – BUENAS CONDICIONESMarca JoypeMod. 850Ancho útil de corte 85cm.Año de fabricación 1990Incluye 1 navaja Apertura de trabajo es de 10cm

PARTE: 12423 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER USADA - BUENAS CONDICIONESModelo Eco DS0Año de fabricación 2000.Multicanal para cortar 4 tablas al mismo tiempoIncluye 1 marco de hoja de 500 mm y 1 para hojas de400 mm 480 Volts 60Hz

PARTE: 12422 - PRENSA DE ENSAMBLE FINGER JOINT USADA - BUENAS CONDICIONESMarca WeiliModelo MHZ 1550ªPrensa para ensamble de piezas largas Finger JointLas piezas se introducen ya encoladas Largo útil de ensamble desde 50 cm hasta 5 mt

MAQUINAS PARA CHAPAS Y ENCHAPADOS - LOTE 1USADAS - BUENAS CONDICIONES - EN VENTA EN MEXICOPARTE: 11751 - PRENSA CALIENTE DE VAPOR CON 9 PLATOSPARTE: 11759 - CALDERA DE GAS - 100 HPPARTE: 11754 - 2 ESCUADRADORAS - DOBLE DE CADENA - CAP. 54”  ANCHO X 110” LARGOPARTE: 11752 - ENGOMADORA DE 40”PARTE: 11753 - ENGOMADORA DE 54”PARTE: 11756 - GUILLOTINA 8 PIES - ST JOE MACHINESPARTE: 11757 - BATIDORA - 240 KG CAPACIDAD

MAQUINAS PARA CHAPAS Y ENCHAPADOS - LOTE 2USADAS - BUENAS CONDICIONES - EN VENTA EN MEXICOPARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”PARTE: 11721 - TORNO DESENROLLADOR - ANCHO 100”PARTE: 11722 - SECANTE DE CHAPA - 3 CAMASPARTE: 11723 - SECANTE DE CHAPA - 2 CAMAS - EN FABRICACIONPARTE: 11724 - CALDERA DE 150 HP A BASE ASERRINPARTE: 11725 - MESA VERDE PARA TORNO DE 8 PIESPARTE: 11761 - SLICER - REBANADORA - 8 PIES DE LARGOPARTE: 11726 - AFILADORA DE CUCHILLASPARTE: 11758 - PARCHADORA RAINMA...

PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260 USADA – MUY BUENAS CONDICIONESYear of Manufacture: 2018Condition: ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working dimensions:Cross section min./max 0.48"- 10.23" width; .25" - 3.15" thickness. Min. part length 5.5" cut. Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...

PARTE: 12419 - PRENSA - GRABADORA DE MOLDURAS - MAKOR USADA – MUY BUENAS CONDICIONES This machine has been designed to hot-press directly on wood or using wood paste. It is particularly suitable for coffins and funeral fittings, furniture and accessories, picture frames, pelmets, etc. Press length 17.71" to R/L Material max width; 7.68") Engraving depth 3mm Dual propane torch heaters Includes: Large inventory of wheels as shown 230 Voltage 60 Cycle 3 Phase ...

PARTE: 12418 - PRENSA - 50 TONS - 60” X 48”Usada - Buenas condiciones4-Post Model: Custom28″ Stroke50″ Daylight 60″ X 48″ Bed Area

PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD USADA – MUY BUENAS CONDICIONES3 HP TEFC Dual Voltage MotorsWired for 460 Volt, 3 PhaseStart and E-Stop buttonsLeft head fixed, Right head manually position via hand crankMinimum Cut Length @ 90 = 13”Maximum cut length @ 90 = 100”Both heads rotate inward 90 to 45 degreeBoth heads tilt outward to 45 degree for compoundTwo hand anti tie down cycle control on pedestalBuilt in 3rd party hydro-checkPne...

PARTE: 2TA-DC78 - CORTADORAS DE PERNOS - ¼” - ¾” - PARA HACER TAQUETES RAYADOSNUEVA CON GARANTIAFeatures:High production, high speed.Can auto sift out dowel which length is insufficient.Each spiral fluting, straight fluting, smooth and dowels with dowel cross-cut and chamfering from DC-7500.Capacity: about 7,500-15,000 dowels/hour with infinitely variable speed change.Cutting length range: 30-150 mm.Accuracy turbine and turbine shaft perform feeding transfer, lubrication for trans...

PART: 1AM-0010-E – PALLET DISMANTLER - MOTOR 10 HP - HEAVY DUTYNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220VOn/Off Switch with magnetic starterBand saw 228” long x 1-1/4” wideTable dimensions: 60” width x 48” depthMaximum size pallet to dismantle: 60” wide x any lengthVideo: https://vimeo.com/797821377Optional: Motor 5 HP, 220/440V, 3 phase - connected to 220VMotor 5 HP, 220V, 1 phaseMotor ...

PARTE: 12415 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC USADA - BUENAS CONDICIONESModel ContouramatWorkpiece Length: 115 - 1500mm (4.52" - 59")Workpiece Width: 30 - 250mm (1.2" - 10")Workpiece Thickness: 12 - 50mm (.5" - 2")Left & Right Top & Bottom Trip SawsTrim Saw Motors are 4 HP Each (Two Per Side)Trim Saw Blade Diameter: 125 - 180mmLeft & Right Profiling/Cope StationsCope Motors: 7.4 HP EachProfiling Cutterhead Diameter: 160 - 220mmHopper Feed ...

PARTE: 12414 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC USADA - BUENAS CONDICIONESFriulmac AutomaticCut Off MachineCutting Length 6.29" - 59.05"Working Width 1.18" - 5.51"Working Thickness 0.47" - 1.37"Four 4HP (3KW)Trim/Cut-off Motors 2 (2 each side)Saw Blade Diameter 150mm Max X 30mm boreDust Collection 4 X 120mm Outlets New in 2019Video: https://www.youtube.com/watch?v=b5BPcY82hjs

PARTE: 12416 – ESPIGADORA DOBLE DE CADENA - FRIULMAC USADA - BUENAS CONDICIONESModel ContouramatThe ideal solution for double-end trimming and coping, with only one operator required!Working Length: 115 - 1500mm (4.52" - 59")Working Width: 30mm - 250mm (1.18" - 9.84")Working Thickness: 12mm - 50mm (0.47" - 1.96")Configuration: Double-End Trim & Double-End Cope/ProfilingLeft & Right Trim Motors: 4 HP EachTrim Blade Diameter: 125mm - 180mmTrim Blade Bore: 30mmLeft & Right Cope/Prof...

PARTE: 12413 – ESPIGADORA DOBLE DE CADENA - SCMI USADA - BUENAS CONDICIONESSCMI Concept 2000 • Opening Capacity: ~4'• Two-Post Machine• First Station: Left & Right Trim Saws• Trim Saw Motors: 8 HP Each• Second Station: Left & Right Jump-CopeUnits, 7000 RPM• Jump Cope Motors: 11.5 HP Each• Third Station: Left & Right Cope Units, 7000RPM• Cope Motors: 11.5 HP Each• Load Space: 32"• Rubber Padded Feed Chains 2.75" Wide• Pop-Up Dogs on 14-3/4" Centers• Push-...

PARTE: 12405-17 - TROMPO 3HP USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-16 - TORNO PARA MADERA DE 60 CMS 2400 RPM 12 HP USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-15 - SIERRA TROZADORA DE BRAZO 2 HP USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-14 - SIERRA DE BANCO DE 3 HP DISCO DE DIAMETRO DE 12” USADA - BUENAS CONDICIONES 220V, 3 FASES

PARTE: 12405-13 - SIERRA DE BANCO MOTOR 3 HP DISCO DE DIAMETRO DE 12" USADA - BUENAS CONDICIONES 220V, 3 FASES