PARTE: 2LE-800128 - PRENSA DE TABLEROS -  REACONDICIONADACapacity 8.5' length panel maxTotal clamps 175Clamp size 2 1/2" x 32"Glue application roller includedPanel flattenerPneumatic clamp tensionerConditionGoodModel #800128Year Mfg1988MfgJT Taylor Mfg

PARTE: 2LE-460 IRD 20 - COLECTOR DE POLVOS - FILTRO ABIERTO - REACONDICIONADADonaldson model 460 IRD 20 open filter dust collector system - motor on fan 20 HP 230/460 volts - CFM rating 7000 - inlet size 17" - duct fitting from fan to collector - starter switch not includedOEM adapter kit available from Donaldson for barrel material storageConditionVery goodModel #460 IRD 20

PARTE: 2LE-CX - REASERRADORA DE BANDA - HORIZONTAL - REACONDICIONADABaker model CX dual head horizontal resaw with 30 HP motorsCapacity 12"x 12" max materialVariable speed feed works 10 to 120 FPM hydraulic systemVery clean machine was running cedar lumberConditionVery goodModel #CXYear Mfg2018

PARTE: 2CC-C500R - SIERRA TRONZADORA - REACONDICIONADAOriginally Manufactured in 1980SC Industrial Resource GroupCompletely rebuilt in 20205 HP motor that can be wired for 240, or 480 voltage 3 PhaseNew Magnetic Starter with 110 Control VoltageArbor & Air Cylinder completely rebuiltFresh Powder CoatCutting Capacity is 2" x 8"FOB - Manawa, WI

PARTE: 2CC-14MRH - SIERRA TRONZADORA - REACONDICIONADAPrecision Products 14" Mechanical Right Hand Cut Off SawS/N: 1794Completely Refurbished (4-2025)5 HP TEFC currently wired for 460V 3 PhaseMagnetic starter with 110 control voltageStandard cycle speed of 133 cycles/minute2"x 8" cutting capacity14" sawblade not includedFOB - Manawa, WI

PARTE: 2CC-14MRH - SIERRA TRONZADORA - REACONDICIONADAPrecision Products 14" Mechanical Right Hand Cut Off SawS/N: 1435Completely Refurbished (9-2025)5 HP TEFC currently wired for 460V 3 PhaseMagnetic starter with 110 control voltageStandard cycle speed of 133 cycles/minute2"x 8" cutting capacity14" sawblade not includedFOB - Manawa, WI

PARTE: 2CC-14MLH - SIERRA TRONZADORA - REACONDICIONADACrosscut Solutions 14" Mechanical Left Hand Cut Off SawS/N: 041202Completely Refurbished (7-2026)Brand New 5 HP TEFC currently wired for 460V 3 PhaseMagnetic starter with 110 control voltageStandard cycle speed of 133 cycles/minute2"x 8" cutting capacity14" sawblade not included

PARTE: 12751 - LIJADORA CALIBRADORA DE 2 BANDAS - 52" ANCHOTimesavers Model 252-2 Belt size: 52" x 75"First Head: 40 HP Grooved Rubber Contact Drum 9-1/2" DiameterSecond Head: 30 HP, Finishing platen- 2-1/2" WideFeed Motor 2 HPPneumatic trackingDust collection requirements 3500 CFMInfeed emergency stop bar24" Load tableTwo 8" Ports

PARTE: 12750 - ADITAMENTO PARA SIERRA ESCUADRADORAMain components appear complete, may need some other hardware, nuts bolts, spacers etc.Maximum cut off width depends on table saw, 57" For Motel 66 and 54" for Models 68,72,74See last photo for specs.

PARTE: 12749 - SIERRA DE BANCOIncludes fence and extension table support legsIncludes miter gauge assemblyTable is missing a trim piece on the end, see photos of broken wood 

PARTE: 12748 - TORNO DE BANCO13" swing over bed40" distance between centers18-3/4" swing over gapD1-4 Camlock spindle mount with MT#5 spindle taper1.57" (40mm) spindle boreMT#3 tailstock taperEquipped with 3-jaw chuck and chuck safety guardIncludes articulated work light and flexible coolant lineQuick-change tool post and cross slide assemblyFoot pedal brake system (linkage is sticky, brake need pulled up to position, may need cleaned)Tested and works as it should

PARTE: 12747 - ROUTER DE PEDESTAL DE ALTA VELOCIDAD3 HP, 230V, Single Phase operationPneumatic spindle head actuation via foot pedalsee photos, foot control guard is brokenTested and works as it should, no table.

PARTE: 12746 - COMPRESOR DE AIRE DE TORNILLO ROTATIVOCFM: 883-1020CFM according to internet searchPSI: On @ 90PSI Off At 100PSI (adjustable) Machine PSI Max 145Horse Power: 215Hp 160kWVolts: 480V OnlyAmps: 315Hertz: 60Discharge Size: 3-1/2" NPTHours - Load: 32,187 Power on timeHours - Run: 8466 running hoursType: Rotary ScrewManufacture Date: 2015Cooling Type: Air-CooledVariable speed drive (VSD) operationLow running hours 8466Tags were removed from machine, we did include photos of original tag...

PARTE: 12745 - COLECTOR DE POLVOS20 HP, 208-230/460V, 3 Phase electric motor1765 RPM rated motor speed at 60Hz7000CFM 14" InletMulti-cone hopper collection manifold configurationIncludes internal filter support tubes and hardwareIncludes barrel drum clamp rings and filter bags (cotton bags, are included in box, did not open box to keep contents clean, do not know if there are plastic collection bags in there, but the clamps for both are included .Units secured in original wooden transport crate

PARTE: 12743 - MESA DE TIJERATable Type: ScissorLoad Capacity (lbs): 4000Table Length: 48"Table Width: 48"Table Maximum Height: 43"Table Minimum Height: 7"Table Power Source: ElectricMotor HP: 1Volts: 115Phase: Single PhaseControl Type: Foot PedalPower Cord Length: 7'Lift Time from Down to Up (Approx Seconds): 36Tested and works as it should.

PARTE: 12742 - SIERRA CINTA 34"Tested and works as it should.No brake

PARTE: 12741 - SIERRA CINTA 34" Tested and works as it should.46" x 31" Tilt TableNo Brake

PARTE: 12740 - HORNO DE AIRE CALIENTE Unit was tested and concluded that the thermostat needs replaced. Temp hits and maintains 190°.Tunnel measures 16" wide and 8" tall 46" long

PARTE: 12739 - HORNO DE AIRE CALIENTE  Tested and works as it should.208V OnlyDrive bar roller styleConveyor is 69" Long

PARTE: 12738 - COMPACTADORA HORIZONTAL DE CARTONAutomatic wire tier is missing on one side.Machines operates in manual mode only, operator must remain in contact with switch while in operationTested and works as it should in manual mode wired, 480VMachine will work as is, but must be manually tied, or run continuously without ties.Unit will need evaluated and programmed to utilize PLC and monitorUpgrades were utilized but look as though they were later abandoned. There is a PLC and Touch screen ...