PARTE: 12750 - ADITAMENTO PARA SIERRA ESCUADRADORAMain components appear complete, may need some other hardware, nuts bolts, spacers etc.Maximum cut off width depends on table saw, 57" For Motel 66 and 54" for Models 68,72,74See last photo for specs.

PARTE:12749 - SIERRA DE BANCOIncludes fence and extension table support legsIncludes miter gauge assemblyTable is missing a trim piece on the end, see photos of broken wood 

PARTE: 12748 - TORNO DE BANCO13" swing over bed40" distance between centers18-3/4" swing over gapD1-4 Camlock spindle mount with MT#5 spindle taper1.57" (40mm) spindle boreMT#3 tailstock taperEquipped with 3-jaw chuck and chuck safety guardIncludes articulated work light and flexible coolant lineQuick-change tool post and cross slide assemblyFoot pedal brake system (linkage is sticky, brake need pulled up to position, may need cleaned)Tested and works as it should

PARTE: 12747 - ROUTER DE PEDESTAL DE ALTA VELOCIDAD3 HP, 230V, Single Phase operationPneumatic spindle head actuation via foot pedalsee photos, foot control guard is brokenTested and works as it should, no table.

PARTE: 12746 - COMPRESOR DE AIRE DE TORNILLO ROTATIVOCFM: 883-1020CFM according to internet searchPSI: On @ 90PSI Off At 100PSI (adjustable) Machine PSI Max 145Horse Power: 215Hp 160kWVolts: 480V OnlyAmps: 315Hertz: 60Discharge Size: 3-1/2" NPTHours - Load: 32,187 Power on timeHours - Run: 8466 running hoursType: Rotary ScrewManufacture Date: 2015Cooling Type: Air-CooledVariable speed drive (VSD) operationLow running hours 8466Tags were removed from machine, we did include photos of original tag...

PARTE: 12745 - COLECTOR DE POLVOS20 HP, 208-230/460V, 3 Phase electric motor1765 RPM rated motor speed at 60Hz7000CFM 14" InletMulti-cone hopper collection manifold configurationIncludes internal filter support tubes and hardwareIncludes barrel drum clamp rings and filter bags (cotton bags, are included in box, did not open box to keep contents clean, do not know if there are plastic collection bags in there, but the clamps for both are included .Units secured in original wooden transport crate

PARTE: 12743 - MESA DE TIJERATable Type: ScissorLoad Capacity (lbs): 4000Table Length: 48"Table Width: 48"Table Maximum Height: 43"Table Minimum Height: 7"Table Power Source: ElectricMotor HP: 1Volts: 115Phase: Single PhaseControl Type: Foot PedalPower Cord Length: 7'Lift Time from Down to Up (Approx Seconds): 36Tested and works as it should.

PARTE: 12742 - SIERRA CINTA 34"Tested and works as it should.No brake

PARTE: 12741 - SIERRA CINTA 34" Tested and works as it should.46" x 31" Tilt TableNo Brake

PARTE: 12740 - HORNO DE AIRE CALIENTE Unit was tested and concluded that the thermostat needs replaced. Temp hits and maintains 190°.Tunnel measures 16" wide and 8" tall 46" long

PARTE: 12739 - HORNO DE AIRE CALIENTE  Tested and works as it should.208V OnlyDrive bar roller styleConveyor is 69" Long

PARTE: 12738 - COMPACTADORA HORIZONTAL DE CARTONAutomatic wire tier is missing on one side.Machines operates in manual mode only, operator must remain in contact with switch while in operationTested and works as it should in manual mode wired, 480VMachine will work as is, but must be manually tied, or run continuously without ties.Unit will need evaluated and programmed to utilize PLC and monitorUpgrades were utilized but look as though they were later abandoned. There is a PLC and Touch screen ...

PARTE: 12737 - COMPACTADORA HORIZONTAL DE CARTONMaren Engineering Corp. model 122-300 horizontal automatic balerLincoln motor rated at 20 HP, 1750 RPMElectrical specifications: 440V, 25A, 3 Phase, 60Hz30" x 30" x Feed Hopper Can Be Operated In Manual Or Automatic Tested and works as it should.

PARTE: 12736 - COMPACTADORA VERTICAL DE CARTONLoad King vertical baler36" x 60"208-230/460V, 3-Phase power requirementEquipped with a hydraulic press head and bottom bale ejector systemSafety lift gate and dual-hand control stationShows normal signs of usageMotor Draws High Amperage. Sold AS ISTested and works as it should.

PARTE: 12735 - COMPACTADORA VERTICAL DE CARTONFox Manufacturing Co. (Fox Baler) Vertical Downstroke BalerModel: 72Serial: 944086Features a Baldor 10 HP Industrial Motor (Cat. No. CM3714T)Motor Specs: 208-230/460V, 1725 RPM, 3 Phase, 60Hz, 215TC FrameControl panel marked for 440 VoltsIncludes manual control selector (Up/Down/Auto/Man)Bale size is approx 72" x 30 x 20"Baler will be horizontal on a pallet due to the height. Hydraulic reservoir will be emptied.Door safety switch does not work.All ot...

PARTE: 12734 - POLIPASTO - 2 TONSCapacity (tons): 2Capacity (lb): 4000Lift Travel (feet): 20'Lift Speed (feet per minute): 26Volts: 230/460Phase: 3 PhaseMotor Horse Power: 4Hoist Duty Class: H4Lifting Medium: Link ChainMinimum Distance Between Hooks (inches): 38"Pendant/Control Length From Bottom of Hoist (ft): 17'Length of Hoist power supply cord (ft): 2'Industrial electric chain hoistEquipped with chain container and pendant controlLoad Tested and works as it should.

PARTE: 12733 - POLIPASTO - 2 TONSCapacity (tons): 2Capacity (lb): 4000Lift Travel (feet): 20'Lift Speed (feet per minute): 26FPMVolts: 230/460VPhase: 3PhHoist Duty Class: H4Lifting Medium: ChainMinimum Distance Between Hooks (inches): 32"Length of Hoist power supply cord (ft): 3'Hoist Comes With Chain ContainerThis is a used hoist in good condition, it has been load tested and works like it shouldIn good condition, new pendant and chain bag

PARTE: 12729 - VIRUTERA - COLOR BLANCO Usada - Buenas condiciones Motor Eléctrico 2 cabezas La caja tiene 30" de largo y 20" de ancho Produce como 5 yardas la hora

PARTE: 12729 - VIRUTERA - HUTTO MINI - COLOR VERDE Usada - Buenas condiciones Motor Gasolina Produce como 5 yardas la horaNota:Junto con la otra maquina en existencia:Las 2 máquinas se tienen conectadas con un conveyor que de la blanca se va a la verde Las 2 máquinas juntas hacen como 35 bolsas la hora

PARTE: 12728 - SIERRA MULTIPLE PARA PANELES - 60” CAPACIDAD ANCHO - MULTISCORE Usada - Buenas condiciones 60” CAPACIDAD MOTOR 25 HP, 440V, 3 FASES