PARTE: 2TA-GS-12ME - ENGOMADORA DE BANCO - 12" ANCHO Nueva con garantía Designed for water-based woodworking glues.Glue is applied to the bottom edge of the stock when the stock is passed by hand across the roll.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The high-quality 6" diameter, 12" wide grooved rubber roll for durability usage.Removable stainless steel glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Floor stand, air re...

PARTE: 3YC-YC-A6 - PRENSA ARMADORA DE SILLAS Nueva con garantía Master pump motor power: 5 HP Oil capacity of master pump: 80 Litres Working pressure: 80÷100 bar Total horsepower:  5 HP Working air pressure: 6 kg/cm² Machine dimensions (LxWxH): 2250 x 2020 x 1210 mm Packing dimensions (LxWxH): 2020 x 2140 x 1230 mm Net weight / Gross weight: 1400 kg / 1500 kg

PARTE: 3YC-YCR-4+2 - PRENSA ARMADORA DE SILLASNueva con garantía Master pump motor power: 5 HP Capacity of the master pump: 80 Liters Number of the locking cylinders: 4 Useful work dimensions: 700x700 mm Inclination of lock:  5 HP Working air pressure: 6 kg/cm² Machine dimensions (LxWxH): 2000 x 2000 x 850 mm Packing dimensions (LxWxH): 2100 x 1800 x 1270 mm Net weight / Gross weight: 1150 kg / 1250 kg

PARTE: 2AR-34102 – ACCESORIO PARA UNIONES COLA DE MILANO NUEVA EN SU CAJA ORIGINALUse your router to make strong, beautiful dovetail jointsCut tails, pins, half-blind and standard dovetailsMale and female dovetail cuts can be made in one passCam-lock clamps quickly secure workpieceAccepts stock up to 12 in. wide, 1-1/4 in. thickProduct Height: 10-1/4 in.Product Length: 15-3/4 in.Product Width: 17 in. Shipping Weight: 17.40 lb.

PARTE: 2CK-PCM120Power stroke of head permits easy, fast and accurate successive cuts.Separate fan blower to keep work clean and free from dust and chips.Manual adjustable table height and lateral positionHeavy duty cast iron construction.Convenient centralized control panelFoot pedal actuated cycle.Pneumatic workpiece clamping by lever Chisel range 1/4″~3/4″ Motor 2HP Spindle speed 3400 RPM ...

PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides.  The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching.  With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...

PARTE: 2CK-DWM-36 - ARMADORA DE CAJONESQuick settingStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingKEY ADVANTAGESCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various drawer widths with the rapid change clampErgonomic workstation on an angle to improve production outputDouble acting air cylinders can apply pressure progressively allowing for easy fitting of the bottom ...

PARTE: 2CK-JDT75 - ENLAZADORA/COLA DE MILANOThis fully automatic machine produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity.High-quality finish in both plywood and solid wood drawer box materialFast operation with up to 40 drawer boxes produced in an hourSolid cast iron machine structure for vibration-free dovetailing leading to a long machine lifeSuperior finish with two flute dovetail bitFEA...

PARTE: 2CK-JDT65Ideal for drawer production and furniture parts which require high quality dovetail joints.Workpieces are pneumatically clamped to speed up material changeoversEquipped with one four-sided template providing four pitches between dovetails.Floating dovetailing unit has ball bearings which run on chrome steel guiderails for effortless operationStandard pitch 1″, 1 ½”, 2″ and 2 ½”Solid carbide single flute eccentric dovetail bit controls the fit of the joint18500 RPM spind...

PARTE: 2CK-BM-301FEATURES:Motor and drilling head mounted on carriage, sliding on parallel bars with pneumatic movement.Come with adjustable two spindle drill head.Pneumatic work clamp to firmly hold workpieces.Machine operation activated by shrouded foot pedal.Cast iron work table with miter gauge for angled holes.Screw rise and fall adjustment of work table for varying timber thicknesses.Enclosed sheet steel floor stand supporting the machine. Table size 400 x 2...

PARTE: 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions.  The HS21T has a robust fabricated steel construction with precision machined cast iron table.  The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM.  Each spindle is equipped with a quick-change chuck t...

PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers.  The spring-loaded index pin allows for accurate and convenient continuous line drilling operations.  The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup.  The complete back fence can be adjusted for various measurements from the edge of the panel to the holes.  The precision boring head has interlocking steel ...

PARTE: STANDARD-408 – ROUTER CNC – 4 X 8 PIES – MOTOR 8.6 HP (6 KW) – MESA VACIO Nuevo con garantíaMesa 4 X 8 pies y 5 X 10 piesOptional: Rotary axis / lathe Inspection services: Machine Gantry X Axis square rails Parallel vertical accuracy 0.001” (0.03mm)Y Axis square rails Parallel vertical accuracy 0.001” (0.03mm)Z Axis ball screw Parallel vertical accuracy 0.001” (0.03mm)Machine Re-position accuracy 0.001” (0.02mm)Machine working accuracy 0.002” (0.05mm)Grating ru...

PARTE: 2CK-MX550AUIs a versatile portable edgebanding solution for the hobbyist or industrial user.  It is capable of edgebanding radius or straight workpieces and can be operated as a handheld unit (standard) or a stationary system with the optional table accessory.  The edgebander is equipped with a glue pot which uses granulated hot melt glue with an operating temperature range from 120oC to 200oC (250oF to 390oF).   The full kit includes the portable edgebander, power trimmer, workpiece ...

PARTE: 2CK-MX370PIs designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick change glue pot allows you to change glue colours in minutes.Premilling ensures a perfectly square...

PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more.  The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint.  It comes equipped with high frequency motors on both the end trim and top & bottom trim.  In addition it is equipped with PVC radius scraping and buffing units.  User friendly controls and adjustments allow for efficient changeovers of edge tape th...

PARTE: 2CK-MX340Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more.  It comes equipped with high frequency motors on both the end trim and top & bottom trim.  In addition it is equipped with PVC radius scraping and buffing units.  It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who does not require pre-milling.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick ch...

PARTE: 2CK-MX370MIs designed to be a compact & durable entry level edgebander with pre-milling & corner rounding functions offered at an affordable price. This machine is equipped with pre-milling, combination end trimming & corner rounding unit, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mmCompact design with dual function end trim and corner rounding unitVersatile edgebander capab...

PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS - AUTOMATICANueva con GarantiaIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability.  With fine attention to detail and quality componentry, the MX350M can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end tri...

PARTE: 2CK-MX340MIs an entry level edgebander with the perfect blend of quality and affordability.  With fine attention to detail and quality componentry the MX340M can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the ideal edgebanding solution for small worksho...