PARTE: 12425 - COSEDORA DE CHAPA KUPER USADA – BUENAS CONDICIONESModelo FW-1200 EAño Fabricación 1995.Espesor máximo de chapa para coser 2mm.Uso de hilo de marca kuper con hotmelt para hacer el pegado de la chapa. Velocidad de avance variable dependiendo de la tersura o rugosidad de la chapa, espesores etc.

PARTE: 12424 - GUILLOTINA TESTERA USADA – BUENAS CONDICIONESMarca JoypeMod. 850Ancho útil de corte 85cm.Año de fabricación 1990Incluye 1 navaja Apertura de trabajo es de 10cm

PARTE: 12423 - SIERRA MULTIPLE - DE VAIVEN - WINTERSTEIGER USADA - BUENAS CONDICIONESModelo Eco DS0Año de fabricación 2000.Multicanal para cortar 4 tablas al mismo tiempoIncluye 1 marco de hoja de 500 mm y 1 para hojas de400 mm 480 Volts 60Hz

PARTE: 12422 - PRENSA DE ENSAMBLE FINGER JOINT USADA - BUENAS CONDICIONESMarca WeiliModelo MHZ 1550ªPrensa para ensamble de piezas largas Finger JointLas piezas se introducen ya encoladas Largo útil de ensamble desde 50 cm hasta 5 mt

MAQUINAS PARA CHAPAS Y ENCHAPADOS - LOTE 1USADAS - BUENAS CONDICIONES - EN VENTA EN MEXICOPARTE: 11751 - PRENSA CALIENTE DE VAPOR CON 9 PLATOSPARTE: 11759 - CALDERA DE GAS - 100 HPPARTE: 11754 - 2 ESCUADRADORAS - DOBLE DE CADENA - CAP. 54”  ANCHO X 110” LARGOPARTE: 11752 - ENGOMADORA DE 40”PARTE: 11753 - ENGOMADORA DE 54”PARTE: 11756 - GUILLOTINA 8 PIES - ST JOE MACHINESPARTE: 11757 - BATIDORA - 240 KG CAPACIDAD

MAQUINAS PARA CHAPAS Y ENCHAPADOS - LOTE 2USADAS - BUENAS CONDICIONES - EN VENTA EN MEXICOPARTE: 11720 - TORNO DESENROLLADOR - ANCHO 54”PARTE: 11721 - TORNO DESENROLLADOR - ANCHO 100”PARTE: 11722 - SECANTE DE CHAPA - 3 CAMASPARTE: 11723 - SECANTE DE CHAPA - 2 CAMAS - EN FABRICACIONPARTE: 11724 - CALDERA DE 150 HP A BASE ASERRINPARTE: 11725 - MESA VERDE PARA TORNO DE 8 PIESPARTE: 11761 - SLICER - REBANADORA - 8 PIES DE LARGOPARTE: 11726 - AFILADORA DE CUCHILLASPARTE: 11758 - PARCHADORA RAINMA...

PARTE: 12420 – SIERRA OPTIMIZADORA – DIMTER WEINIG OPTICUT 260 USADA – MUY BUENAS CONDICIONESYear of Manufacture: 2018Condition: ExcellentElectric: 460 Voltage 60 Cycle 3 PhaseGREAT CONDITION HIGH SPEED INFEED 750 FPM. LESS THAN 1000 HOURS ON THIS MACHINE.Working dimensions:Cross section min./max 0.48"- 10.23" width; .25" - 3.15" thickness. Min. part length 5.5" cut. Length min/max 15.75"- 16'0".Motor: 10 HP vario speed to reduce board gap; servo controlled up to 825 FPM.Saw:...

PARTE: 12419 - PRENSA - GRABADORA DE MOLDURAS - MAKOR USADA – MUY BUENAS CONDICIONES This machine has been designed to hot-press directly on wood or using wood paste. It is particularly suitable for coffins and funeral fittings, furniture and accessories, picture frames, pelmets, etc. Press length 17.71" to R/L Material max width; 7.68") Engraving depth 3mm Dual propane torch heaters Includes: Large inventory of wheels as shown 230 Voltage 60 Cycle 3 Phase ...

PARTE: 12418 - PRENSA - 50 TONS - 60” X 48”Usada - Buenas condiciones4-Post Model: Custom28″ Stroke50″ Daylight 60″ X 48″ Bed Area

PARTE: 2TA-GS-60RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 60” Nueva con garantíaRoller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue...

PARTE: 2TA-GS-36RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 36” Nueva con garantíaRoller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue...

PARTE: 2TA-GS-48RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 48” Nueva con garantíaRoller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue...

PARTE: 2TA-GS-24RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 24” Nueva con garantíaRoller coaster type are efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue...

PARTE: 2TA-GS-12RO2 - ENGOMADORA 2 LADOS – CAPACIDAD ANCHO 12” Nueva con garantíaRoller coaster type efficiently & effectively apply glues with a minimum of setup and easily maintained.Set of three rolls (one doctor roller) for top-only or four rollers (two doctor roller) for top and bottom glue application.We designed our glue spreaders with high quality grooved rubber glue rollers with hardened rubber doctor rolls for durability usage.Stainless drip pan catches the over spread glue for...

PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12" ANCHONueva con garantía4’ infeed, 6’ outfeed for easy gluing applicator setup.Grooved rubber roller for water-based wood working glue spreader.Removable stainless steel conveyor belt, glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The glue applicator and conveyor are driven by industrial 1/2 HP total enclosure motor.All comp...

PARTE: 2TA-GS-12ME - ENGOMADORA DE BANCO - 12" ANCHO Nueva con garantía Designed for water-based woodworking glues.Glue is applied to the bottom edge of the stock when the stock is passed by hand across the roll.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The high-quality 6" diameter, 12" wide grooved rubber roll for durability usage.Removable stainless steel glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Floor stand, air re...

PARTE: 12417 - SIERRA INGLETERA DOBLE – CAPACIDAD 13” - 100” LARGO – CTD USADA – MUY BUENAS CONDICIONES3 HP TEFC Dual Voltage MotorsWired for 460 Volt, 3 PhaseStart and E-Stop buttonsLeft head fixed, Right head manually position via hand crankMinimum Cut Length @ 90 = 13”Maximum cut length @ 90 = 100”Both heads rotate inward 90 to 45 degreeBoth heads tilt outward to 45 degree for compoundTwo hand anti tie down cycle control on pedestalBuilt in 3rd party hydro-checkPne...

PARTE: 2TA-DC78 - CORTADORAS DE PERNOS - ¼” - ¾” - PARA HACER TAQUETES RAYADOSNUEVA CON GARANTIAFeatures:High production, high speed.Can auto sift out dowel which length is insufficient.Each spiral fluting, straight fluting, smooth and dowels with dowel cross-cut and chamfering from DC-7500.Capacity: about 7,500-15,000 dowels/hour with infinitely variable speed change.Cutting length range: 30-150 mm.Accuracy turbine and turbine shaft perform feeding transfer, lubrication for trans...

PART: 1AM-0010-E – PALLET DISMANTLER - MOTOR 10 HP - HEAVY DUTYNew with warranty – 6-month warranty on manufacturing defects on mechanical parts onlyMotor 10 HP, 220/440V, 3 phase - connected to 220VOn/Off Switch with magnetic starterBand saw 228” long x 1-1/4” wideTable dimensions: 60” width x 48” depthMaximum size pallet to dismantle: 60” wide x any lengthVideo: https://vimeo.com/797821377Optional: Motor 5 HP, 220/440V, 3 phase - connected to 220VMotor 5 HP, 220V, 1 phaseMotor ...

PARTE: 12415 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC USADA - BUENAS CONDICIONESModel ContouramatWorkpiece Length: 115 - 1500mm (4.52" - 59")Workpiece Width: 30 - 250mm (1.2" - 10")Workpiece Thickness: 12 - 50mm (.5" - 2")Left & Right Top & Bottom Trip SawsTrim Saw Motors are 4 HP Each (Two Per Side)Trim Saw Blade Diameter: 125 - 180mmLeft & Right Profiling/Cope StationsCope Motors: 7.4 HP EachProfiling Cutterhead Diameter: 160 - 220mmHopper Feed ...