Identificador: 2889
Abierta
.PNG)
Descripción
PARTE: 2RI-R450V - ARMADORA DE PUERTASTechnical Data and Specifications:
Is designed for high and low volume production requirements. Is the smallest version of our heavy duty cabinet door clamping tables. In this system the operator is freed from the task of managing individual bar or pipe clamps, and instead, uses pneumatic clamp cylinders to apply pressure to the glue line. Each cylinder is easily operated by a slide toggle, and the entire system is activated by a foot pedal. The vertical easel allows for fast and square assembly. The multiple pneumatic clamps ensure high clamping pressures on the piece.
Standard Features:
- 3' X 6' Vertical Assembly Easel
- 40° Easel Angle
- (4) Universal Clamping Cylinders & Manifold
- Squaring Bar and Fence
- 2" Cylinder Position Grid Pattern
- 3" Bore Clamp Cylinder Housing
- Heavy Duty Steel Frame
- Perforated Steel Table
- 6 port Manifold with 1/4" NPT Regulator/Gage
- Adjustable pressure from 20 to 130 PSI
- Foot Treadle
Technical Data and Specifications:
- Usable Table Area: 71" x 34"
- Work Height: 31"
- Footprint: 74" x 30"
- Electrical: N/A
- Air: 80-100 PSI
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 2HP
PARTE: 2MK-CP/2.C - COLECTOR DE POLVOS - 2HPIs ideal for collecting light powder from small and medium machines such as saws and sanders. The air flow of this collector is 1,165 ft³/min, resulting in a clean and pleasant environment for your work. The large bag has a capacity of 5.4 sq. feet.Technical InformationMotor Specs1 Phase 220V 2HP 15 Amps 60HzsAir Flow capacity1490 CFMFan Diameter12" | 305mmBag Capacity5ft3Number of air intel2Inlet sizeMain:5" |125mm - Spliter: 4" | 100mmFiltration1 mi...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 5HP
PARTE: 2MK-CPD/5.S - COLECTOR DE POLVOS - 5HPIs ideal for cabinet shops with high production. With a 200 liters (53 Gallons) tank capacity, you can attach carbon steel or bag, both tanks are easy to be replaced. It has 5 entries with 100 mm (4 inches) and a 5 hp motor. The entry system can be changed according to the needs of its owner.Technical InformationMotor specs5 HP 3 phases 220V 20 AAir Flow Capacity2760 CFMBag volume400 L (14.13 ft³)Number of air inlet:5 (4in)Filtration2.5 micronBag siz...
-500x500.png)
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES ANGULARES
PARTE: 4ST-CT 600 - SIERRA OPTIMIZADORA - CORTES ANGULARESCROSSCUT SAW WITH AUTOMATIC PUSH-FEED FOR ANGLED CUTOPTIMISED CUTTING Is a crosscut saw with automatic push-feed with complete optimisation and defection of the boards.Thanks to its rotating table, it is the optimal solution for all straight (90°) and angular (+/- 70°) cutting for bothsingle board and stack sawing.The pusher is designed with a rack and pinion feed system and brushless motor to ensure maximum cutting precision.The softw...
AMXmachinery1
ROLADORA DE METAL
ROLADORA DE METALIs a heavy-duty, affordable, production tool for forming curved parts and tubes in 16-gauge and lighter sheet metal. The roll has three gear-driven rolls that ensure even starting and feeding of materials. The gearing features a 4:1 reduction ratio for ease of operation of heavy materials. All gears are fully enclosed for safety and protection from the elements. The roll drive is controlled by a toggle-action, shrouded foot switch for instant forward and reverse action. The driv...