ID: 59
Open
Description
PARTE # 2TA-BP-100 - BRIQUETEADORA MOTOR 7.5 HP
- Use wood chips, saw dust and various biomass/ag residues to make the briquettes.
- Cost saving management of waste material by reducing the volume of waste to be handled.
- Effectively helps with compliance of local regulations mandating reduction of solid waste.
- Converts waste into a valuable heating source for colder climates
- Increases profitability by converting waste into a marketable product.
- Design allows for incorporation of multiple units in parallel for unlimited capacity.
| Specifications | BP-100 |
|---|---|
| Installed Power | 7.5 HP |
| Ferrule Dimensions | Ø1000 H 36.22" (920mm) |
| Max. Volume of Saw Dust in a Ferrule | 0.8m³ |
| Briquette Diam | 2" (50 mm) |
| Power | 7.5 HP |
| Pump | 26cm³ 1000g group 2 |
| Max. Working Pressure | 15MPa |
| Dimensions | 66" x 43" x 59" (1680 x 1100 x 1500 mm) |
| N. W. | 1499 LBS (680 kg) |
| G. W. | 1874 LBS (850 kg) |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
TANQUES DE ALMACENAMIENTO DE AIRE
TANQUES DE ALMACENAMIENTO DE AIREMODELO Y PRESION (BARS)CAPACIDAD32IG-600-1 0.6/8 600 L32IG-600-2 0.6/1032IG-600-3 0.6/1332IG-1000-1 1.0/8 1000 L32IG-1000-2 1.0/1032IG-1000-3 1.0/1332IG-1500-1 1.5/8 1500 L32IG-1500-2 1.5/1032IG-1500-3 1.5/1332IG-2000-1 2.0/8 2000 L32IG-2000-2 2.0/1032IG-2000-3 2.0/13- Nuevo con garantía de 12 meses en partes mecánicas
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
PARTE: 1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERY
PARTE:
1AM-1200 - REASERRADORA 1 CINTA – CAPACIDAD 10” ANCHO X 5” ALTO – AMX MACHINERYNueva con garantíaCapacidad de corte máximo: 10” ancho x 5” altoSierra cinta: 131” largo x 1-1/4” ancho - paso 7/8” para
tabletear madera pinoBanda: 160” x 10” anchoMotor principal: 10 HP, 220/440V, 3 fases,
conectado a 220VMotor avance: 2 HP, 220/440V, 3 fases, conectado a 220VMedidas totales: 68” ancho x 80” fondo x 63” alto
Medidas totales de e...
AMXmachinery
PARTE: 2EN-E2410 - COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM
PARTE: 2EN-E2410 -
COLECTOR ASERRIN - MOTOR 10 HP - 5,000 CFM
NUEVO CON GARANTIA• Fan 10 HP• 5,000 CFM• Total Static Pressure 8"wg• Filter Bags/Area qty/SF 24/371• Discharge 2 Bags• Variable Frequency Drive (VFD) at 10 hp and 460V• Add Pressure Transducer Kit Recommended with VFD• Vibratory Cleaning Device (VCD) with 460 V momentary
starter, Aids in filter cleaning• Fan Inlet Adapter with 4" Branch and Manual Gate• Shop Vac Hose Kit 4" x 15' Flex Hose Recommended with
F...