Identificador: 2543
Abierta
.PNG)
Descripción
FINGER JOINT AUTOMATICA PARTE: 2CK-FL03
Is a cutting-edge fully automatic finger jointing production line, designed to efficiently convert wood waste into valuable materials while maintaining an excellent performance-to-cost ratio. With its innovative technology, this system offers remarkable value in terms of both performance and price, the entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line is carefully designed and built for maximum dependability year after year, making it a continuous game-changer in the wood industry.
- Excellent performance-to-cost ratio
- Only two operators required for maximum production
- Injection type gluing system
- Standard: PVAc glue – Tooling for PU, MUF, EPI, etc. glues available upon request
- Length of cut is calculated by an encoder and set on a touch screen for increased accuracy
- Servo motor capable of provides a production rate of up to 5~6 cycles/min
- Three initial infeed tables lead to a fully automatic operation from feed to pre-press assembly stand
- F-C05 and F-C06 finger shapers perform automatic scoring, trimming, shaping, and gluing
- F-D01 enables automated workpiece feeding, aided by a steel brush roller that gently flips materials one by one into the pre-press assembly stand
- With the choice of 10 feet or 20 feet in length the F-T03/F-T05 chain type pre-press ensures accurate vertical and horizontal alignment before workpiece is cut to length
- Synchronized jointing and cutting is performed in a 2-step process within the F-A03 assembly press by employing two hydraulic cylinders at the front and rear to provide an extremely consistent joint
Includes the following:
F-I01 Multi-Stage (Three) Initial Conveyor Tables
Auto Feeding Table | 650 mm (25.6“) |
Brush Wheel Drive Motor | 1 HP x3 |
Machine Dimension (L x W x H) | 3190 x 870 x 970 mm (126 x 35 x 39”) |
Packing Dimension (L x W x H) | 3300 x 970 x 1070 mm (130 x 35 x 43”) |
F-C05 Automatic Finger Shaper – Right End
Max. available width working table | 650 mm (25.6”) |
Range of workpiece length | 150~1000 mm (5.9~39.4”) |
Range of workpiece height | 30~160 mm (1.2~6.3”) |
Table moving speed | 66 FPM |
Trimming saw speed | 2800 RPM, 3400 RPM |
Finger cutter speed | 5000 RPM |
Scoring saw speed | 2800 RPM, 3400 RPM |
POWER REQUIRED | |
Table-drive motor | 1/2 HP |
For conveyor motor | 1/2 HP |
Scoring saw motor | 1 HP |
Trim saw motor | 10 HP |
Shaper cutter motor | 20 HP |
Dia of Cutter (in/out) | ø70 / ø160 mm (ø2.8 / ø6.3) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
PARTE: 2CK-ECT SERIES - DOUBLE END TENONER - 8 CABEZAS - 141” ANCHO
PARTE: 2CK-ECT SERIES - DOUBLE
END TENONER - 8 CABEZAS - 141” ANCHOThey are available with up to (8) spindles (4-per side) and come in widths from 51” to 141”. These double end tenoners are ideal for door, furniture, & window production and more. The ECT series can be customized for your specific needs with a wide range of processing units and features. The ECT are available as a stand-alone solution or can be purchased in a line for processing all four sides of a workpiece auto...
-500x500.jpg)
AMXmachinery1
ASTILLADORA - HORIZONTAL - 15 PULGADAS
PARTE: 2TA-WG-1502H - ASTILLADORA - HORIZONTAL - 15 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutting...
-500x500.png)
AMXmachinery1
TORNO 32 x 80''
TORNO 32 x 80'' PARTE: 2GM-GML-3280 Heavy Duty Precision Gap Bed Lathe 32” x 80” 4-1/8” bore, 15HP Motor. ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials. solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision gro...
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 3HP
PARTE: 2MK-CPD/3.C - COLECTOR DE POLVOS - 3HPWas developed for cabinet shops with high production. With air flow rate of 2,760 ft³/min, the CPD/3 collects dust of up to 3 machines simultaneously.Technical InformationMotor Spec3 HP 1 phase 220 V 15 AAir Flow Capacity2,760 CFMFan Diameter12" | 305mmBag Capacity15 ft3 | 0.43 m3Number of air Inlet3Inlet sizeMain: 6" | 150mm - Spliter: 4"/100mmFiltration1 micronSound Rating89 dBWeight128 Lbs | 58 kg