ID: 2543
Open
.PNG)
Description
FINGER JOINT AUTOMATICA PARTE: 2CK-FL03
Is a cutting-edge fully automatic finger jointing production line, designed to efficiently convert wood waste into valuable materials while maintaining an excellent performance-to-cost ratio. With its innovative technology, this system offers remarkable value in terms of both performance and price, the entire machining procedures from workpiece in-feed, left and right shaping to jointing is fast, smooth and accurate. The whole production line is carefully designed and built for maximum dependability year after year, making it a continuous game-changer in the wood industry.
- Excellent performance-to-cost ratio
- Only two operators required for maximum production
- Injection type gluing system
- Standard: PVAc glue – Tooling for PU, MUF, EPI, etc. glues available upon request
- Length of cut is calculated by an encoder and set on a touch screen for increased accuracy
- Servo motor capable of provides a production rate of up to 5~6 cycles/min
- Three initial infeed tables lead to a fully automatic operation from feed to pre-press assembly stand
- F-C05 and F-C06 finger shapers perform automatic scoring, trimming, shaping, and gluing
- F-D01 enables automated workpiece feeding, aided by a steel brush roller that gently flips materials one by one into the pre-press assembly stand
- With the choice of 10 feet or 20 feet in length the F-T03/F-T05 chain type pre-press ensures accurate vertical and horizontal alignment before workpiece is cut to length
- Synchronized jointing and cutting is performed in a 2-step process within the F-A03 assembly press by employing two hydraulic cylinders at the front and rear to provide an extremely consistent joint
Includes the following:
F-I01 Multi-Stage (Three) Initial Conveyor Tables
Auto Feeding Table | 650 mm (25.6“) |
Brush Wheel Drive Motor | 1 HP x3 |
Machine Dimension (L x W x H) | 3190 x 870 x 970 mm (126 x 35 x 39”) |
Packing Dimension (L x W x H) | 3300 x 970 x 1070 mm (130 x 35 x 43”) |
F-C05 Automatic Finger Shaper – Right End
Max. available width working table | 650 mm (25.6”) |
Range of workpiece length | 150~1000 mm (5.9~39.4”) |
Range of workpiece height | 30~160 mm (1.2~6.3”) |
Table moving speed | 66 FPM |
Trimming saw speed | 2800 RPM, 3400 RPM |
Finger cutter speed | 5000 RPM |
Scoring saw speed | 2800 RPM, 3400 RPM |
POWER REQUIRED | |
Table-drive motor | 1/2 HP |
For conveyor motor | 1/2 HP |
Scoring saw motor | 1 HP |
Trim saw motor | 10 HP |
Shaper cutter motor | 20 HP |
Dia of Cutter (in/out) | ø70 / ø160 mm (ø2.8 / ø6.3) |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.png)
AMXmachinery1
SIERRA MULTIPLE - DIAMETRO DISCOS 12”
PARTE: 2NT-NT-MRS12N - SIERRA MULTIPLE - DIAMETRO DISCOS
12”The NT MRS12N Multiple Rip Saw features a cast iron frame that houses a variable speed dip chain for premium rip capability. Often referred to as gang rip saws, this machine is fitted with closer fitting upper hold down rollers the MRS12N boasts the shortest part feeding on a multiple rip saw. The MRS12N uses 12″ diameter rip saw blades and can be equipped with power raise and lower, invertor speed control and non marking urethane ...
-500x500.png)
AMXmachinery1
TALADRADORA 32 mm, 21 CABEZALES
TALADRADORA 32 mm, 21 CABEZALES PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precisio...
AMXmachinery1
SIERRA MULTIPLE - ALIMENTACION RODILLOS
PARTE: 2CK-SYC300Has been designed to ensure uncompromised results specifically aimed to the company looking to run strip materials like lath, dunnage, stakes, and more. The roll feed design will rip for maximum material yield which helps increase output and margins.Roll feed design achieves maximum yield from the materialHeavy frame ensures smooth running to allow thin cutting of materials like lathFull width top and bottom driven feed rolls assist in smooth feeding of a range of materials ...
AMXmachinery1
CEPILLO 1 CARA - 20 PULGADAS
PARTE: 2CK-P508HVHas a solid steel helical cutterhead with two-sided carbide knife inserts that require no adjustments when changing. With a digital readout and simple PC controller, setting the table height is quick, accurate, and easy. The frame is made from heavy cast iron with known vibration damping resulting in long bearing life and superior cut quality. The planer’s segmented, serrated infeed roll & segmented pressure shoe ensures material is held firmly during the feeding and planing p...