Identificador: 463
Abierta
Descripción
PARTE: 1SL-DC-GC1.5 - GARRUCHA DE CADENA - 1.5 TON
CAPACIDAD 1.5 TONELADA
CADENA DE 3 METROS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – OMAL VELOX 1300
PARTE: 12062 – CNC TALADRO, ENGOMA, INSERTA – OMAL VELOX 1300USADA – MUY BUENAS CONDICIONESIN MINT SHAPEMFG 2014 BUT WAS SOLD NEW JAN 2016INCLUDES LASER PART SENSOR2 ZONE MACHINE WITH 51" WORKING AREAA LASER SENSOR AUTOMATICALLY MEASURES THE WIDTH OF A PANEL AND CALCULATED THE POSITION AND NUMBER OF DOWELS BASED ON A PROGRAM FILETESTEDVIDEO 1: https://vimeo.com/438240935
AMXmachinery
COMPRESOR DE TORNILLO - 30 HP
PARTE: 12340 - COMPRESOR DE TORNILLO - 30 HP
USADO
- MUY BUENAS CONDICIONESCoAire CHSA-30
230/440V,
60 Cy, 3 Phase
Main
Motor: 30 HP
Discharge
Pressure: 150 PSI
Air
Delivery: 100 CFM
Compressor
Speed: 3050 RPM
Ambient
Temperature: 32 Deg. - 115 Def. F
Driving
Method: V-Belt (3VX4)
Oil
Sump Capacity: 5 Gallons
Dimensions:
55-1/2" L x 40-3/8" W x 48-1/2" H
Weight: 1232Filters have been replaced, its been flushed out and has new
oil.The last hours recorde...
AMXmachinery
REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
PARTE:
12561 - REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
Usada - Buenas CondicionesMain motor: 25HP, 220V/440V*
(prewired for 220V), 3-phaseElevation motor: 1/2 HPHydraulic pressure: 1000 PSIBelt Powered Hydraulic Pump -
Main Saw Motor - 25HPMaximum cutting capacity:
10" x 16"Distance from blade to
conveyor table: 1/4"–10"Feed speed: 0–61 FPMSaw blade size: 180" L x
1" WSaw blade speed: 7300 FPMFloor to table height:
40"Infeed table: 106" L x
16" WInfeed belt: 2...