PARTE: 2CK-MX370P - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM       Designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Versatile edgebander capable of applying 0.4mm to 3mm edge tape.Quick change glue pot allows you to change glue c...

PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILLCapable of applying up to 3mm thick edge tape on cabinet parts and more.  The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint.  It comes equipped with high frequency motors on both the end trim and top & bottom trim.  In addition it is equipped with PVC radius scraping and buffing units.  User friendly controls and adjustments allow for effi...

PARTE: 2CK-MX340 - CANTEADORA DE CANTOS - 29 FPM - 0.4 - 3 MMCapable of applying up to 3mm thick edge tape on cabinet parts and more.  It comes equipped with high frequency motors on both the end trim and top & bottom trim.  In addition it is equipped with PVC radius scraping and buffing units.  It’s compact design and affordable price point make it the ideal edge banding solution for the small cabinet shop who does not require pre-milling.Versatile edgebander capable of applying 0.4mm to ...

PARTE: 2CK-MX370M - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILL          Designed to be a compact & durable entry level machine with pre-milling & corner rounding functions offered at an affordable price. This machine is equipped with pre-milling, combination end trimming & corner rounding unit, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mmCompact design with dual f...

PARTE: 2CK-MX350MR - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILLEntry-level machine with pre-milling that is the perfect blend of quality and affordability.  With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system whic...

PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL      Entry level with pre-milling that is the perfect blend of quality and affordability.  With fine attention to detail and quality componentry,  can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...

PARTE: 2CK-MX340M - ENCHAPADORA DE CANTOS - 23 FPM - 0.3 - 3 MM - AUTOMATICA                   Perfect blend of quality and affordability.  With fine attention to detail and quality componentry  can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the id...

PARTE: 2CK-JEN60 - ARMADORA DE CAJONES              Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides.  The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching.  With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers m...

PARTE: 2CK-CN600 - ENLAZADORA DE CAJONES - CNC          Provides optimal flexibility & output in the production of dovetail drawer boxes. The user friendly touch screen interface allows the operator to select from a range of standard dovetail joints as well as program the spacing or pitch of the dovetails.  This allows for maximum flexibility to ensure the optimal aesthetic result.  The dovetail milling unit can also pre-score the workpiece to ensure the best possible finish. In additio...

PARTE: 2CK-HS21T - TALADRO MULTIPLE - 21 CABEZALESIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions.  Has a robust fabricated steel construction with precision machined cast iron table.  The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM.  Each spindle is equipped wit...

PARTE: 2CK-BM301 - TALADRO MULTIPLE - HORIZONTAL   With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience. The dril...

PARTE: 2CK-JB21P - TALADRO MULTIPLE  - 32 MM - 21 CABEZALESIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers.  The spring-loaded index pin allows for accurate and convenient continuous line drilling operations.  The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup.  The complete back fence can be adjusted for various measurements from the edge of the panel to the holes.  The p...

PARTE: 3YC-YOM-120-A – SET FLECHA - ESCOPLO OSCILANTE - 2 MESASNuevo con garantíaFlechaBalerosBase hierro forjado

PARTE: 2CK-MX370PW – ENCHAPADORA DE CANTOS - AUTOMATICA NUEVO CON GARANTIAFrom cabinet parts to cabinet doors, this edgebander can do it all.The MX370PW Automatic Edgebander with Premilling and Corner Rounding is designed to be a compact and durable edgebander offered at an affordable price. This machine is equipped with premilling, end trimming, flush trimming, corner rounding, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient changeovers of edge t...

PARTE: 2CK-MX340 – ENCHAPADORA DE CANTOS - AUTOMATICA NUEVO CON GARANTIAHigh-quality edge banding results for cabinet parts and case goods.The MX340 Automatic Edgebander is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more.  It comes equipped with high-frequency motors on both the end trim and top & bottom trim.  In addition, it is equipped with PVC radius scraping and buffing units.  Its compact design and affordable price point make it ...

PARTE: 2CK-MX340M – ENCHAPADORA DE CANTOS - AUTOMATICANUEVA CON GARANTIACompact design with best-in-class edgebanding result.The MX340M is an entry-level edgebander with the perfect blend of quality and affordability. With fine attention to detail and quality componentry, the MX340M can output high-quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing. User-friendly controls and adjustments allow for efficient cha...

PARTE: 4RI-MOTUS-CNC - FRESADORA Y TALADRO CNC DE AVANCE CONTINUO• Hopper with integrated separation for items with delicate or painted surfaces• Careful belt transport of items through the machineExtra• Waste Conveyer• Return conveyor with integrated brush cleaning unitWorkstation 1:Vertical and horizontal independent spindle drilling heads (customer specific)Workstation 2:Horizontal drilling groups left and rightWorkstation 3:Vertical and horizontal independent spindle drilling heads, ...

PARTE: 4RI-UNI-X 2200 - PERFORADORA DE CLAVIJAS• Drilling from 4 sides: top, right, left, back• Capacity up to 14 pcs/min• Set-up help using light beam• Vertical magazine• One-man operatedExtra• Side movement• Small millings• 45 degree drilling• Can be integrated in a line of machines• Waste ConveyerLength:250 – 2200 mmHeight:10 – 65 mmWidth:25 – 200 mm

PARTE: 4RI-OMNIA 1500 & 2200 - PERFORADORA DE CLAVIJASOne-man operated dowel drilling machines • Drilling from 4 sides : top, right, left, back• Capacity of up to 22 pcs/min• Vertical magazine• One-man operatedExtra:• Side movement• Single drop magazine• Possibility to revers items out of the machine• Can be integrated in a line of machines• Waste ConveyerLength:160 – 1500 mm160 – 2200 mmHeight:10 – 40 mmWidth:25 – 250 mm

PARTE: 4RI-1500-2200-DOWEL-BD - MAQUINA DE PASADORESHigh quality drilling and dowel insertion• Drilling from 4 sides : top, right, left, back• 2 step machine – drilling and doweling• Doweling from 2 sides (left and right)• Capacity of up to 18 pcs/min• Vertical magazine• One-man operatedExtra:• Side movement• Single drop magazine• Possibility to revers items out of the machine• Can be integrated in a line of machines• Waste ConveyerLength:160 – 1500 mm160 – 2200 mmHei...