Identificador: 2815
Abierta
Descripción
PARTE: 2SS-SPM301HD - TALADRO BASTIDOR - 1 BROCA
Pocket-hole joinery for high production woodworkers made easy with our Screw Pocket Machine. This machine allows for simultaneously drilling a pilot hole and machining a screw pocket in under a second.
A two-in-one motion simultaneously drills a six degree pilot hole and machines a screw pocket in under a second on most wood species. Features a heavy-duty, direct drive continuous electric spindle motor, allowing for continuous pocketing production. Features cam-driven action providing fast, smooth cutting action under complete mechanical control throughout the machine cycle. The new pilot air drill and end mill produce superior low-angle 6 degree screw pockets. Requires standard 220V and 6.2 CFM at 90 PSI based on 25% load factor, 25% duty cycle.
Additional Accesories
An extension table can be added
| Weight | 350 lbs |
|---|---|
| Dimensions | 32 x 22 x 44in |
| Crated Dimensions | 36" × 28" × 49" |
| Vacuum Diameter Required | 3" Hose Connection |
| Vacuum CFM Required | 220 CFM |
| Air Requirement | 6.2 CFM at 90 PSI |
| Spindle Motor | 5 amp/18,000 RPM, 3/8" (ER20) Collet |
| Screw Pocket Angle | Six Degrees |
| Spindle Motor Amps | 5 amps |
| Spindle Motor Collet | 3/8” Collet |
| Spindle Motor Max RPM | 18,000 |
| Air Drill | .7HP |
| Air Drill Collet | 1/4" Collet |
| Air Drill Max RPM | 25,000 |
| Screw Pocket Depth Range | .5" to 1.5" |
| Country of Origin | USA |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE DE VAIVEN
PARTE: 2TA-TRS-150F - SIERRA MULTIPLE DE VAIVENFEATURESMinimum kerf multi blade frame saw designed to maximize production and minimize material loss.Thin frame saw design accepts different saw frames & blade combinations.Unique design allows multiple saw fence configurations to produce single, double or multiple cuts in a single pass.Machine supplied with PLC controller to allow operator to maximize saw production & minimize down time.Production times are reduced because of the machine's du...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350MR - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350MR - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILLEntry-level machine with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system whic...
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
-500x500.jpg)
AMXmachinery1
COLECTOR DE ASERRIN - 5 HP
PARTE: 2CK-UFO103BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.5 HP generating 2863 CFMBase is mounted on casters so it can be moved around...